Case IH 3016 12-foot Grass Seed

No Image Available
No Image Available

 

Features

The 3016 pickup head features:

  • An integrated seed dam between the rear picking belt roller and floor — prevents grain/header loss with no need for a rubber seal
  • A fully welded mainframe — 6 in. x 6 in.
  • A heavy-duty, fully welded auger — floating 26-in. (660-mm) diameter with deep flighting
  • Double V pattern retractable auger fingers with patented rubber retaining system — prevents finger from being ingested into the combine and allows for easy finger replacement
  • A heavy-duty RC 80 auger drive chain
  • A rear wind guard — in-cab, hydraulic height adjustment with single-handle, manual-pitch adjustment
  • Fixed gauge wheels with height adjustment allows for optimum picking
  • Flexing pickup frame — allows up to 12 in. of flex within the picking frame
  • Plastic teeth on the pickup belt for gentle handling of crop
  • A two-stage delivery unit — has a pickup belt and transfer belt to optimize pickup and transfer of crop
  • No daily service points required


Small Grain Configuration Features

  • 15-ft. header width, 14-ft.–11.5-in picking width
  • 3-section (5 ft. each) belts for pickup and transfer


Grass Seed Special Features

  • 12-ft. header width, 11-ft.-11 in. picking width
  • One 12-ft. belt for pickup and transfer


Optional Features

  • In-cab hydraulically suspended pickup — provides ultimate flotation when combined with the lateral flexing of the picking frame while maintaining consistent ground pressure
  • Castor gauge wheels optional on both the 12-ft. grass seed configuration and 15-ft. small grain configuration — provides enhanced tracking in turns and eliminates ground scuffing while reducing frame stress
  • Auxiliary front wind guard — for use in short crops, which tend to bunch or roll in front of the picking belt

Specifications

Model 3016 12-foot Grass Seed
Header  
Nominal Header Size, ft in (m) 12' (3.66)
Actual Picking Width, ft-in, (m) 11' 11" (3.63)
Max outside width, ft-in (m) 14' 7" (4.45) fixed whls; 15' 9" (4.80) caster whls
Automatic Header Height Control Standard
Auger  
Auger Diameter, in (mm) 26 (660)
Auger Speed, rpm 174 std; 144 opt
Auger Finger Material, plastic or steel Steel finger, plastic holder, rubber retainer
Auger finger diameter, in (mm) 0.63 (16)
Pickup Belts  
Number of Belts Single belt
Individual Belt Width, in (mm) 11' 11" (3632)
Material of teeth on belt Plastic
Tires  
Tire Size 18x8.5-8 (210/60-8)
Weights  
Weight, Header-Auger, without pickup, lb (kg) np
Weight, Pickup only, lb (kg) np
Total Weight, lb (kg) 3,090 (1402)
Sales Literature  
Literature number CIH11051001
Literature date 11/1/2010
Operators Manual  
Manual number GH-2092-10
Manual date 10/1/2010
Entry Date  
Manufacturing status Current
First Entry Date 11/1/2012
Revision Date --
  • brand caseih
  • brand ashland
  • brand brent
  • brand cubcadet2
  • brand gehl
  • brand geringhoff
  • brand grasshopper
  • brand greatplains
  • brand kinze
  • brand landoll
  • brand landpride
  • brand macdon
  • brand polaris
  • brand rotomix
  • brand supremeint
  • brand vermeer