Land Pride RCF3672

Double tap to zoom

 

Features

FEATURES BENEFITS
Surpassed rugged industry standards All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures.
5 Year gearbox warranty A rugged heavy built gearbox capable of handling heavy cutting applications. Shows our confidence in the gearbox integrity.
190 HP gearbox A rugged heavy built gearbox capable of handling heavy cutting applications.
Cat. 5 driveline with 4-plate slip-clutch Slip-clutch driveline offers convenience for continual work.
Dual position clevis type 3-point floating top link Permits deck to follow the terrain for an even cut. Additional set of holes for tractors with shorter top links.
Lower clevis type 3-point hitch Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design.
Heavy deck construction with 3/16" deck top & 1/4" side skirts Strong heavy deck material for rugged use.
Box tubing deck supports Makes for a stronger rigid deck.
Fully welded deck Adds additional strength.
Round back design Helps discharge grass better than enclosed or partially enclosed cutters.
13 3/8" Deck Height Allows cutter to handle heavy cutting conditions.
2" to 12" Cutting height Provides for a wide range of cutting conditions.
High cutting capacity Can cut brushy areas with saplings up to 4".
Skid shoes Provides sidewall reinforcement and protection to bottom of sidewall.
1/2" x 4" Heat-treated free swinging blades Free swinging protects from obstructions. Heat-treated offers longer life.
Splined blade bar hub Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
3/16" Plate stump jumper Standard round stump jumper slides over stumps, rocks and debris.
High blade tip speed Ensures clean cut.
15"Laminated tailwheel Laminated material is long lasting in rough conditions and can't go flat.
1 1/2" Heavy-duty spindle on tailwheel Tailwheels take a beating, spindle gives the strength to protect tailwheel assembly.
Optional Guarding Protect against flying debris. Customer can choose to include single chain, double chain or rubber guarding on the front and single chain or double chain guarding on the back.

Specifications

Model RCF3672
Machine weight

1337 lbs.with front and rear single chain guards
Hitch Category l or II with Floating Clevis Top Link, Quick Hitch Adaptable
Cutting width 72"
Overall width 78 1/2"
Overall Length 124 3/4"
Deck height (bottom of deck to
bottom of skid shoe)
13 3/8"
Cutting height 12" to 12"
Cutting capacity 4" Diameter
Recommended tractor power
take-off horsepower
60-190 horsepower
Power take-off speed 540 rpm
Gearbox ratio 1:1.48 Speed-Up Beveled Gears,
Cast Iron Housing, 1 3/4"-20 spline
input shaft and 2 3/8" output shaft
Gearbox Lubricant EP 80-90W oil
Gearbox oil Capacity 10 pints
Deck construction All welded deck
Deck material thickness 3/16"
Side skirt material thickness 1/4"
Skid Construction Replaceable bolt on skid shoes
Stump jumper Round Pan 3/16" x 30 7/16" with Blade Holder Bar
Blades (2) 1/2" x 4" Heat Treated Alloy Steel
Free-Swinging High Lift - Low Friction
Blade bolts Keyed with harden flat washers & lock nuts
Blade tip speed 14,861 FPM
Driveline ASAE Category 5 with 4-plate Slip Clutch
Driveline protection Center Bolt 4 plate Slip Clutch
Tailwheel mount Welded A-arm and Caster Fork with 360 degree swivel
Tailwheel 4" x 8" x 15" Laminated Tire with cast iron hub
Front guard Optional: Rubber Belting or Single Chain Guard or Double Chain Guard
Rear guard Optional: Single Chain Guard or Double Chain Guard
  • brand caseih
  • brand ashland
  • brand brent
  • brand cubcadet2
  • brand dalton
  • brand gehl
  • brand geringhoff
  • brand grasshopper
  • brand greatplains
  • brand kinze
  • brand landoll
  • brand landpride
  • brand macdon
  • brand polaris
  • brand rotomix
  • brand supremeint
  • brand vermeer