Land Pride RCF3684

No Image Available
No Image Available

 

Features

FEATURES BENEFITS
Surpassed rugged industry standards All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures.
5 Year gearbox warranty A rugged heavy built gearbox capable of handling heavy cutting applications. Shows Land Pride's confidence in gearbox integrity.
Cat. 5 driveline with 4-plate slip-clutch Slip-clutch driveline offers convenience for continual work.
Cat. II and III 3-Point Hitch Options with Quick Hitch Capability Fits a wide variety of tractors. Quick Hitch provides for fast hook-up.
Dual position clevis type 3-Point floating top link Permits deck to follow the terrain for an even cut.
Lower clevis type 3-Point hitch Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design.
Pull-type hitch option Fits older tractors without a top link and smaller tractors without enough lift capacity.
84" Cutting width Wide cutting width, reduces cutting time in the field.
Heavy deck construction with 3/16" deck top & 1/4" side skirts Strong heavy deck material for rugged use. Heavy side panels protects sides from debris being thrown against them from the blades.
Fully welded deck Adds additional strength and deck integrity.
Round back design Helps discharge grass better than enclosed or partially enclosed cutters.
13 3/8" Deck height Allows cutter to handle heavy cutting conditions.
2" to 12" Cutting height Provides for a wide range of cutting conditions.
High cutting capacity Can cut brushy areas with saplings up to 4".
Skid shoes Provides sidewall reinforcement and protection to bottom of sidewall.
1/2" x 4" Heat-treated free swinging blades Free swinging protects from obstructions. Heat-treated offers longer life.
Splined blade bar hub Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
3/16" Plate stump jumper Standard round stump jumper slides over stumps, rocks, and debris.
High blade tip speed Ensures clean cut.
4" Dia. cutting capacity Can aid in clearing brush.
Dual laminated tailwheels Dual tailwheels offer greater stability in uneven terrain. Laminated material is long lasting in rough conditions. Can't go flat.
1 1/2" Heavy-duty spindle on tailwheel (3-Point cutter) Tailwheels take a beating, spindle gives the strength to protect tailwheel assembly.
Wheel bearings (Pull-type cutter) Tapered roller bearing in cast iron hub.
Optional guarding Protect against flying debris.

Specifications

Model Numbers RCF3684 3-Point Type RCF3684 Pull-Type
Machine weight 2,000 lbs. (907.2 kg) With front & rear single chain guards 2,104 lbs. (954.4 kg) With hydraulic adjustment and front & rear single chain guards
Hitch Category II or III with floating clevis
top link, Quick Hitch adaptable
Pull-type with clevis
Pull type tongue weight N/A 894 lbs. (405.5 kg)
Cutting width 84" (2.13 m) 
Overall width 90 1/2" (2.30 m) 
Overall length 130" (3.30 m) 179 1/2" (4.56 m)
Deck height
(Bottom of deck to bottom of skid shoe)
13 3/8" (34.0 cm)  
Cutting height 2" - 12" (5.1 cm to 30.5 cm) 
Cutting capacity 4" (10.2 cm) Diameter 
Recommended tractor horsepower 70-190 hp (52.2-141.7 kw) 50-190 hp (37.3-141.7 kw)
Power take-off Speed 540 rpm 
Gearbox 1:1.21 Speed-up beveled gears, Cast iron housing,
1 3/4" (4.4 cm) - 20 spline input shaft and 2 3/8" (6.0 cm) output shaft 
Gearbox lubricant 80-90W oil 
Gearbox oil capacity 10 pints (4.73 L) 
Deck construction All welded deck 
Deck material thickness 3/16" (5 mm) 
Side skirt material thickness 1/4" (6 mm) 
Skid construction Replaceable bolt on skid shoes 
Stump jumper / blade holder 3/16" (5 mm) Round dish shaped bolt-on stump-jumper with diamond shaped blade bar 
Blades (2) 1/2" x 4" (1.3 cm x 10.2 cm) Heat treated alloy steel free-swinging high lift - low friction 
Blade bolts Keyed with harden flat washers & locknuts 
Blade tip speed 14,369 fpm (73.0 mps) 
Driveline ASAE category 5 with 4-plate slip clutch 
Driveline protection 4 plate slip clutch 
Transport axle Cushioned shock absorption 
Rear deck height adjustment options Ratchet jack or hydraulic cylinder 
Tailwheel 4" x 8" x 15" Laminated tire with cast iron hub4" x 8" x 21" Laminated tire with cast iron hub
Front guard Optional: Rubber belting, single chain guard or double chain guard  
Rear Guard Optional: Single chain guard or double chain guard 
Jack Stand Jack stand on tongue of pull-type cutter
  • brand caseih
  • brand ashland
  • brand brent
  • brand cubcadet2
  • brand gehl
  • brand geringhoff
  • brand grasshopper
  • brand greatplains
  • brand kinze
  • brand landoll
  • brand landpride
  • brand macdon
  • brand polaris
  • brand rotomix
  • brand supremeint
  • brand vermeer