Land Pride RTR1258

Double tap to zoom

 

Features

FEATURES BENEFITS
American made American made means better quality & parts availability. Most tillers are imported.
Tractor hp range* 42" & 50"
58" & 60"
74"
82"
15-40 hp
20-50 hp
25-60 hp
30-60 hp
Reverse tilling action Reverse action ‘sucks’ tiller into ground, does not walk on top of hard ground like forward rotation tillers can.
3 year Gearbox Warranty 3 Years on housing, seals, & bearings. shows our confidence in the product.
10 Year limited warranty on
sprockets and roller chain
Shows our confidence in this product providing many years of service.
42", 50", 58", 66", 74", & 82"
Working widths
A wide range of widths are available to meet specific customer needs.
6-1/2” Digging depth For deep soil penetration.
Bent plate steel upper hitch Plate steel is stronger than flat bar type hitch.
Clevis lower hitch Provides additional strength and easy one person hook-up.
Offset Capabilities Allows tiller to work closer to objects such as fence lines, buildings and trees.
Fits Land Pride Quick-Hitch Allows for quick and easy one person hook-up.
(Offset cannot be used with Quick Hitch.)
Adjustable parking stand Allows for easy hook-up and storage.
Adjustable skid shoes Control depth with seven adjustments.
Formed and reinforced rear deflector Keeps dirt in and leaves a level finish. Forming gives deflector additional strength. Adjustable deflector allows for various finish results.
Front deflector Front deflector is flexible to take the beating from rocks or debris.
Bolt in rotor Rotor removes and replaces easier for servicing.
15" Rotor swing diameter For deep tilling and turns the soil over faster.
4 ‘C’ shaped heat-treated tines per flange “C” Shaped tines require less hp to move through the ground.
Four tines requires less horsepower than 6 tines.
Double lip seal on rotor bearing Double lip seal helps keep the dirt out and the grease in.
Fully shielded slip-clutch driveline Protects the gearbox and rotor shaft upon hitting obstructions. Slip-clutch saves having to replace shear-pins
#80 Drive chain enclosed in oil bath Heavy drive chain stretches less, and oil bath keeps wear to a minimum.
Stamped chain case cover Stamped forming gives the chain cover strength.
Optional BX driveline This driveline will fit BX Kubota tractors without cutting it to fit.

Specifications

Model RTR1258
Recommended tractor PTO hp* 20 to 50 hp
Weight 463 lbs.
Width, end plate to end plate 58"
Overall width 63 1/4"
3-Point hitch type Category l, Adjustable Lower Hitch Clevis with Plated Pins
Fits Land Pride Quick Hitch
Offset capabilities Tiller can be offset up to 7", but must be centered if using Quick Hitch
Sideshift dimensions centered
Shifted right
Shifted left
29" - 29"
22" - 36"
36" - 22"
Number of flanges on rotor 7
Number of tines per flange 4
Tine 4construction Alloy steel heat treated “C” shaped blades
Rotor rotation Reverse Rotation
Rotor swing diameter 15"
Rotor Shaft Speed 211 rpm at 540 rpm PTO
Rotor bearing mounts Machined cast iron
Skid shoes Adjustable
Storage stands Adjustable
Rear tailgate Adjustable rear tailgate
Front deflector Rubber
Driveline Category 4 with Slip Clutch
Gearbox Construction 60 hp input at 540rpm 1.92:1 ratio, Cast iron housing with ASAE 1 3/8" - 6 spline shaft,
tapered roller bearings, bevel gears, drain plug, level plug & fill plug
Lubrication SAE 80-90W EP oil
Capacity 2 pints
Drive chain #80 Roller chain - Fully enclosed in oil bath with drain & fill plugs
Drive chain lubrication Shell Gadus S2 V2200 00 flowable grease or equivalent
Land Pride Part #821-045C (32 oz. bottle)
Sprockets Case hardened teeth, splined bores
  • brand caseih
  • brand ashland
  • brand brent
  • brand cubcadet2
  • brand dalton
  • brand gehl
  • brand geringhoff
  • brand grasshopper
  • brand greatplains
  • brand kinze
  • brand landoll
  • brand landpride
  • brand macdon
  • brand polaris
  • brand rotomix
  • brand supremeint
  • brand vermeer