Vermeer BPX9000 / NOT AVAILABLE
Bale Processors BPX9000
Overview:
The Catapult® CPX9000 bale processor is a machine that offers power, versatility and easy operation. The Catapult processor allows material to be thrown 60 ft - 100 ft (18.3 m - 30.5 m), whether that be up and over feed bunks in a cattle operation or for land reclamation and erosion control purposes. Hydraulic controls... + Read More
Features
SMOOTH MATERIAL FEEDING
Optimizing productivity, the Catapult processor provides smooth material feeding by adjusting the feed rate of the bale chain bed to maintain a proper load and PTO RPM on the tractor.
CONSISTENT MATERIAL FLOW
Direct feed from a dual fan air circulation system provides consistent material flow from the tub to the spout, reducing inconsistent material flow common with non-direct feed systems.
REPLACEABLE, ABRASIVE-RESISTANT STEEL LINERS
Replaceable, abrasive-resistant steel liners provide durability, especially needed when processing contamination-filled material like cornstalks.
OPTIONAL HYDRAULIC CUT CONTROL BAR KIT
Adjust cut control bar position from the tractor cab with the optional hydraulic cut control bar kit. Use the hydraulically controlled adjustment alone, or in conjunction with the reversible slat and chain bed bale rotation to help mitigate tough processing conditions.
Specifications
| DIMENSIONS AND WEIGHTS | |
| Length | 15.6 ft |
| Height | 10 ft |
| Transport Width | 8.4 ft |
| Working Width | 19.8 ft |
| Weight | 7460 lbs |
| Drawbar Weight | 2500 lbs |
| Axle adjustment12 in (30.5 cm) each axle | 12 in (30.5 cm) each axle |
| Tires | 16L-16.1SL 6 SofTrac II |
| TRACTOR REQUIREMENTS | |
| PTO horsepower minimum | 110 hp (82 kW) with automatic bale feed; Without automatic bale feed, use recommended PTO horsepower |
| PTO horsepower recommended | 150 hp |
| PTO horsepower maximum | 210 hp |
| PTO speed | 1000 rpm |
| Hydraulic Type | 2 double-acting |
| Hydraulics Pressure | 2000 psi |
| Hydraulic flow rate | 8 gpm |
| TUB | |
| Bale rotation | 3 roller chains with bolt-on cross slat |
| Bale size capacity | (2) bales, 6 ft x 5 ft (1.8 m x 1.5 m) |
| Bale weight capacity | 2500 lbs |
| PROCESSING SYSTEM | |
| Cut Control Bar Adjustment | Hand lever with 5 settings |
| Cut Control Bar Quantity | 7 |
| Flail description | 7/16 in x 5-9/16 in (1.1 cm x 14.1 cm) in tempered spring |
| Flail Drum Diameter | 26.8 in |
| Flail Drum Length | 78 in |
| Flail Drum Speed | 1000 rpm |
| Flail Drum Quantity | 30 |
| DISCHARGE SYSTEM | |
| Discharge Direction | Right and left hand, a 260-deg rotation |
| Blower | (2) 38.6 in (98 cm) blower fans (1500 rpm front and 1000 rpm rear) |
| Fan speed - front | 1500 rpm |
| Fan speed - rear | 1000 rpm |
| Horizontal spread distance | Up to 100 ft (30.5 m) |
| FEATURES | |
| Safety Chain | Optional |
| Torque Protection - Driveline | 2 shear hubs |
| Material containment kit | Optional |
| Powered sidewall | Standard |
| Automatic bale feed system | Standard |
| Camera kit | Optional |
| High-wear resistance liner | Optional |
