Case IH TD102 / NOT AVAILABLE
Features
Superior Crop Flow
The Case IH TD102 pull-type disc mower features a modular cutterbar design for superior crop flow that reduces streaking and ensures quick mowing. The cutterbar is designed with:
- Shock protection to minimize repair expense
- Discs protected from internal gear damage by the drive hub
- Crop deflector shields located behind each end of the cutterbar to direct cut crop into a wide swath inside the tire path
- Two end discs that co-rotate to provide a narrower swath
- Able to adjust swath from 60 in–95 in (1.5 m–2.4 m)
- Left cutterbar shield is hinged for easy service access
80-degree Constant Velocity Joint
- Overload protection is standard
- Primary PTO uses an 80-degree constant velocity joint at the tractor end to permit tight turns, reduce noise and extend service life
- Standard tractor tire bumpers protect PTO driveline and tractor tires
Adjustable From 2-10 Degrees
Tilt is adjustable from 2–10 degrees using a mechanical turnbuckle.
Easy Transport
Attaching and detaching the mower from the tractor is easily accomplished with a simple clevis hitch . The TD102 can be pulled by lighter-weight tractors , as weight is pulled versus carried on a 3-point hitch.
- Transport width is just 10 ft 10 in (3,300 mm) when end shields are folded
- Removable parking jack stand is stored on top of tongue assembly
- Hydraulic tongue swing cylinder powers the unit from transport to operating position
- Has a 12-in (305-mm)-minimum cutterbar ground clearance in transport position
- Hinged right-side cutterbar shield folds up for narrow transport
- Safety tow chain standard
- Low transport height eliminates the need for implement lights
Specifications
Model | TD102 Pull-Type |
Mower Size | |
Number of Discs | 8 |
Position relative to Tractor | Trailing, side-pull |
Cutter Bar | |
Cutting width, ft in (m) | 10' 4" (3.15) |
Swath width, ft in (m) | 7' 11" (2.41) |
Cutting height, in (mm) | 0.95-3.2 (24-81) |
Mowing arc, +/- from horizontal, degrees | Trailing wheels follow ground |
Breakaway angle, degrees, or description | Breakaway latch, spring-loaded |
Discs | |
Knives per disc | 2 |
Disc speed, rpm | 3000 |
Disc cutting diameter, in (mm) | 19.7 (500) |
Drive between discs, bevel or spur gear | Bevel gears in sealed modules |
Tractor Requirements | |
Tractor horsepower hp (kW) | 60 (45) |
PTO rated speed, rpm | 540 |
Three-point hitch category, or drawbar | Pin to drawbar |
Hydraulic circuits required | Two (one single, one double-acting) |
Dimensions and Weight | |
Transport width, ft-in (m) | 10' 10" (3.30) |
Transport length, ft-in (m) | 15' 8" (4.78) |
Transport height, ft-in (m) | 5' 2" (1.57) |
Weight, lb (kg) | 2,610 (1186) |
Trailing Tires | |
Trailing tire size | 27x9.5-15, 6PR |
Sales Literature | |
Literature number | CIH7180803 |
Literature date | 2009 |
Other Documentation | |
Document number | -- |
Document date | -- |
Entry Date | |
Manufacturing Status | Current |
First Entry Date | 12/15/2008 |
Revision Date | 6/20/2013 |