Great Plains 7112DH

No Image Available
No Image Available

 

Features

EXCLUSIVE MAINTENANCE-FREE BEARINGS

These 360° self-aligning bearings are never sideloaded. A six-lip seal on each side locks in grease and prevents contamination, which reduces maintenance time and extends the life of the bearings.

 

SPRING-OFFSET C-SHANKS

Offset C-shanks cushion the gangs and protect the unit. The offset design also maximizes the clearance between the disc blades to help prevent plugging.

 

SPRING-LOADED SCRAPERS

Standard scrapers are spring loaded; quickly make them rigid by tightening a bolt.

 

SPEEDBLADE™

With a 5% faster turning speed than regular concavity blades, the exclusive SpeedBlade™ aggressively powers through heavy residue and thoroughly mixes soil at higher speeds without ridging. This self-sharpening serrated blade works like a regular notched blade, but its shallower blade cutout allows for shallower working depth. Unlike competitive blades, the low-concavity SpeedBlade stays sharper longer and maintains its shape as it wears. With more blade surface, the SpeedBlade wears better and last longer than blades with larger notches.

 

SINGLE-POINT DEPTH CONTROL

Change the depth of the entire machine from one central location.

 

INCREASED TIRE AND HUB CAPACITY

All transport tires are radial tires and carry loads at 73 psi. Units also feature 8-bolt hubs on center and wings, with up to 8000-pound capacity for improved reliability.

 

IMPROVED GROUND CLEARANCE

Transport clearance of 13" allows for 24" or 26" diameter blade options, and a low-profile, t-style hitch tightens the turning radius in the field. Hydraulic gauge wheels, which actively raise and lower with main lift wheels, have also been added to the outside wings on larger units.

 

IMPROVED GANG BARS

Stronger 4" x 6" gang bars have polygon bushings and hardened pins for greaseless hinge points. Four bolt attachment plates and cradle gussets relieve stress on gang tubes.

 

HYDRAULIC GAUGE WHEELS

Front gauge wheels adjust manually on 23', 26', and 30' models and hydraulically on 29', 33', and 36' models. Hydraulic gauge wheels prevent gouging and wing hop.

 

HYDRAULIC FORE/AFT LEVELING

On 3-section models, hydraulic fore-and-aft leveling simplifies field adjustments to create a smooth finish in any soil condition.

 

HEAVY, DUCTILE CAST SPOOLS

Our heavy, ductile cast spools each weigh 23.55 lbs., while welded spools used by competitors weigh only 11.01 lbs. each. Putting weight “in” the gang versus “over” the gang increases reliability in the C-shank and bearings. Nuts on each end of the disk gangs provide easy, quick maintenance.

DOUBLE OFFSET

Design ensures complete center cutout and eliminates the need for a middle breaker.

 

DISC BLADE CHOICES

Equip your disk harrow with a choice of disc blades. Click on the photo to view all options (from left): 22" or 24" SpeedBlades; 22" 6-gauge; 22" .25" rollable; 24" 6-gauge; 24" .25" rollable; 26" .25" non-rollable; or 26" .25" notched. SpeedBlades turn 5% faster than conventional smooth discs.

Specifications

MODELS 7112DH
NO. OF BLADES (9") 38
NO. OF BLADES (7.5") 46
TRANSPORT TIRES 340/60R16.5 (4)
WING TIRES N/A
WEIGHT (APPROX LBS) 6,100
PTO H.P. REQ (MIN) 84+
DIMENSIONS  
TILLAGE WIDTH (9") 11' 9"
TILLAGE WIDTH (7.5") 12' 3"
WIDTH (TRANSPORT) 13'
HEIGHT (TRANSPORT) N/A
TILLAGE INFO  
CENTER SECTION N/A
1ST SECTION N/A
  • brand caseih
  • brand ashland
  • brand brent
  • brand cubcadet2
  • brand gehl
  • brand geringhoff
  • brand grasshopper
  • brand greatplains
  • brand kinze
  • brand landoll
  • brand landpride
  • brand macdon
  • brand polaris
  • brand rotomix
  • brand supremeint
  • brand vermeer