Case IH 3152 Draper Head

No Image Available
No Image Available




Less Grain Loss

Case IH Draper Heads feature narrower end dividers on the cutterbars, reducing crop knockdown and increasing grain savings.

In-Cab Fore/Aft Tilt Adjustment

Tailor the cutterbar angle to optimize crop flow from the header to the combine from the comfort of the cab.

Durable for Maximum Uptime

The Case IH 3152 Series II features a rigid cutterbar available in a variety of widths, ranging from 25 ft to 45 ft. The 3152 includes a reinforced z-channel for cutterbar straightness.

More Acres, Less Fatigue

Optional Automatic Header Height Control (AHHC) allows the operator to maintain perfect height. The AHHC utilizes 4 upgraded sensors for increased accuracy. In 2019, AHHC features improved harness routing, improved CCM and UCM Software and Factory Fit Options for the Case IH 3152 Series II model.


Improve Performance Across the Cutterbar

The CentraCuttmcenter-mounted knife drive improves performance and minimizes cutterbar vibration. The head is driven from the center, eliminating gear boxes on the ends of the header and allowing for much narrower dividers, reducing crop knock down.

Strength and Stability

The CentraCuttm center knife drive features a heavy-duty knife head and offers 2X the cutting force as dual wobble box and 3X the cutting force as a single wobble box. Helical cut gears ensure that the cutter bar never falls out of timing. If the knife drive becomes plugged, it is fully reversible from inside the cab. CentraCuttm has improved dirt evacuation flap and seals .


The CentraCuttm is a hydraulically driven mechanical drive, with adjustable knife speed on the back side of the header. This well-balanced knife drive is driven from the center, eliminating the need for a double knife drive.


Versatile Reel Reduces Crop Loss In Any Field Condition

The cam action reel found on all Case IH 3100 Series II draper heads positively engages then gently lifts the crop over the cutterbar and across the draper belt floor, reducing reel shatter. For different crop conditions the cam timing can easily be changed to provide different reel tine angles. In 2019, reel anti-wrap kits are standard equipment on all Series II draper heads. Additionally, the reel drive motor and reel travel, tine shape and design have all been upgraded.


High Capacity Draper Belts Maximize Yield

The two side belts and two center belts gently convey the crop across the draper floor and into the feeder house so that the heads of the plant are always feeding first. 3100 Series II draper heads use WCCO belts for superior performance. Wide belts match the capacity of the combine. A Seed Saver Channel on the bottom edge of the draper belts allows the grain to be pulled in to the combine instead of being lost. If the draper belt is damaged, it can be serviced rather than replaced.


Make Case IH
Model 3152 Rigid
Draper Header  
Cutting width, ft in (m) 25, 30, 35, 40, 45 (7.62, 9.14, 10.67, 12.19, 13.72)
Rigid or Flex Rigid
Vertical Flex Range, in (mm) Rigid
Automatic Header Height Control Standard
Gauge / Stabilizer wheels Standard, 35' and wider
Low Speed Transport Optional, hydraulic deploy
Sickle Cutterbar  
Single or double knife Dual opposing knives
Knife width 3 (76)
Knife drive CentraCut center mounted drive
Knife speed, strokes per minute Up to 2 x 630 = 1260
Number of bats or tine bars 6 tine bars
Tine material Plastic std; steel opt.
Reel Diameter, in (mm) 42 (1070)
Reel speed, rpm 0 to 60
Draper and Infeed  
Cross Belt width, in (mm) 41.5 (1054)
Cross Belt speed, ft/min (m/min) 0 to 630 (0 to 192)
Center Infeed belt speed, ft/min (m/min) 630 (192)
Center Infeed belt width, in (mm) Two 41.5 (1054) = 83 (2108)
Infeed drum or auger diameter, in (mm) 26 (660)
Upper Cross Auger Optional
Weight, 25' width, lb (kg) 5,230 (2372)
Weight, 30' width, lb (kg) 5,642 (2559)
Weight, 35' width, lb (kg) 6,142 (2786)
Weight, 40' width, lb (kg) 7,752 (3516)
Weight, 45' width, lb (kg) 9,342 (4237)
Sales Literature  
Literature number Case IH Spreadsheet
Literature date 12/1/2013
Other Documentation  
Document number 47450013
Document date 5/1/2013
Entry Dates  
Manufacturing status Current
First Entry Date 12/30/2013
Revision Date --
  • brand caseih
  • brand ashland
  • brand brent
  • brand cubcadet2
  • brand gehl
  • brand geringhoff
  • brand grasshopper
  • brand greatplains
  • brand kinze
  • brand landoll
  • brand landpride
  • brand macdon
  • brand polaris
  • brand rotomix
  • brand supremeint
  • brand vermeer