Case IH 3016 15-foot Small Grain

No Image Available
No Image Available



The 3016 pickup head features:

  • An integrated seed dam between the rear picking belt roller and floor — prevents grain/header loss with no need for a rubber seal
  • A fully welded mainframe — 6 in. x 6 in.
  • A heavy-duty, fully welded auger — floating 26-in. (660-mm) diameter with deep flighting
  • Double V pattern retractable auger fingers with patented rubber retaining system — prevents finger from being ingested into the combine and allows for easy finger replacement
  • A heavy-duty RC 80 auger drive chain
  • A rear wind guard — in-cab, hydraulic height adjustment with single-handle, manual-pitch adjustment
  • Fixed gauge wheels with height adjustment allows for optimum picking
  • Flexing pickup frame — allows up to 12 in. of flex within the picking frame
  • Plastic teeth on the pickup belt for gentle handling of crop
  • A two-stage delivery unit — has a pickup belt and transfer belt to optimize pickup and transfer of crop
  • No daily service points required

Small Grain Configuration Features

  • 15-ft. header width, 14-ft.–11.5-in picking width
  • 3-section (5 ft. each) belts for pickup and transfer

Grass Seed Special Features

  • 12-ft. header width, 11-ft.-11 in. picking width
  • One 12-ft. belt for pickup and transfer

Optional Features

  • In-cab hydraulically suspended pickup — provides ultimate flotation when combined with the lateral flexing of the picking frame while maintaining consistent ground pressure
  • Castor gauge wheels optional on both the 12-ft. grass seed configuration and 15-ft. small grain configuration — provides enhanced tracking in turns and eliminates ground scuffing while reducing frame stress
  • Auxiliary front wind guard — for use in short crops, which tend to bunch or roll in front of the picking belt


Model 3016 15-foot Small Grain
Nominal Header Size, ft in (m) 15' (4.57)
Actual Picking Width, ft-in, (m) 14' 11.5" (4.56)
Max outside width, ft-in (m) 17' 7" (5.36) fixed whls; 18' 9" (5.72) caster whls
Automatic Header Height Control Standard
Auger Diameter, in (mm) 26 (660)
Auger Speed, rpm 187 std; 160 or 212 opt
Auger Finger Material, plastic or steel Steel finger, plastic holder, rubber retainer
Auger finger diameter, in (mm) 0.63 (16)
Pickup Belts  
Number of Belts 3 belts
Individual Belt Width, in (mm) 59.83 (1520)
Material of teeth on belt Plastic
Tire Size 18x8.5-8 (210/60-8)
Weight, Header-Auger, without pickup, lb (kg) np
Weight, Pickup only, lb (kg) np
Total Weight, lb (kg) 3,180 (1442)
Sales Literature  
Literature number CIH11051001
Literature date 11/1/2010
Operators Manual  
Manual number GH-2092-10
Manual date 10/1/2010
Entry Date  
Manufacturing status Current
First Entry Date 11/1/2012
Revision Date --
  • brand caseih
  • brand ashland
  • brand brent
  • brand cubcadet2
  • brand gehl
  • brand geringhoff
  • brand grasshopper
  • brand greatplains
  • brand kinze
  • brand landoll
  • brand landpride
  • brand macdon
  • brand polaris
  • brand rotomix
  • brand supremeint
  • brand vermeer