Gehl R135 GEN:2

Double tap to zoom




Net Power (kW) 44.5 hp (33)
Maximum Torque (Nm) 107.8 ft.-lbs. (146)
Rated Operating Capacity (kg) 1,350 lbs. (612)

Operator's Cabin

The R135 GEN:2 features a new, state-of-the-art, fully-adjustable operator's cab.

  • Sound reduction material within the cab suppresses outside noise for a quieter operator environment.
  • A front-lifting restraint bar with integrated armrests provides personalized comfort and increased safety.
  • Standard high-back adjustable seat and optional air-ride suspension seat or mechanical suspension seat provide enhanced, all-day comfort.
  • Cab forward design enhances view to the bucket edge. Lowered rear towers improve visibility to the rear of the machine.
  • Hydraloc™ System - Brakes and hydraulics are applied automatically whenever the operator raises the restraint bar, leaves the operator's seat or switches off the ignition.
  • Creature comforts include automatic dome light, cup holder, 12-volt outlet, storage tray and multiple adjustable air vents. 


  • NEW low-effort control choices now include standard Servo-Assist T-Bar or Servo-Assist Hand/Foot or Optional Pilot Joystick controls with Hydraglide ride control system drastically reduce lever efforts and lower operator fatigue.
  • Digital color display shows real time fuel consumption, engine RPM's, machine hours, engine diagnostic codes, warning indicators and much more.
  • All instrumentation is conveniently located in the upper-right and left instrument panels for easy access. 
  • Hydraloc™ system applies brakes whenever the operator raises the restraint bar, leaves the operator’s seat or switches off the ignition.


The R135 GEN:2 is equipped with an all-new Yanmar Tier IV naturally-aspirated diesel engine. 

  • Automatic glow plug heating system provides superior cold-weather starting.
  • After treatment meets all Tier IV requirements through proven technology. 
Make Yanmar
Model US Tier 4 | EU Stage 3A | ROW iT4
Net Power (kW) @ rpm 46.6 hp (34.3) @ 2800
Maximum Torque (Nm) @ rpm 107.8 ft.-lbs. (146 Nm) @ 1820
Displacement (L) 133.6 (2.19)


The R135 GEN:2 has amped-up hydraulic systems which incorporate intuitive design for precise controllability.

  • Standard proportional auxiliary hydraulic control gives the operator the ability to adjust attachment speeds with infinitely adjustable flow control.
  • Attachments changes are clean and easy with flat-faced quick couplers that allow for changes by hand instead of tools.
  • Hardened chrome cylinder rods resist pitting, rusting and scratching, extending the life of the cylinders.
Auxiliary Hydraulics - Standard (L/min) 17 gpm (64.4)
High-Flow Auxiliary Hydraulics - Option (L/min) N/A
Reservoir Capacity (L) 10 gal. (37.9)

Attachment System

A full line of Edge attachments and accessories are designed specifically to fill operators’ needs, making their R135 GEN:2 the most versatile machine on the job site. Popular attachments are listed below.

A Bale Movers
B Brooms
C Grapples
D Pallet Forks
E Mower, Rotary
F Skeleton Rock Bucket
G Stump Grinders
H Tree Puller/Grabbing Tool


Lift Arm

The R135 GEN:2 features an all-new low-profile lift arm.

  • 42% more visibility with new low-profile lift arm.
  • Selectable hydraulic self-leveling option keeps the bucket level throughout the lift cycle.


Excellent service access and quality components pair up to provide durable machines that are easy to maintain.

  • Large engine cover is hinged and positioned by gas-springs to assist lifting and holding in place, and allows for easy return to closed/operating position.
  • Swing-out rear door easily opens on hinges, allowing full access to filters and fluid reservoirs, for servicing and maintenance.
  • All-new swing-out cooler provides improved access to the engine bay area.
  • Entire ROPS/FOPS assembly tilts rearward with a gas-spring assist for easy internal access to the pumps, hydraulic valve bank and drive motors.
  • All-new cab safety restraint & pull cord safely holds ROPS/FOPS in raised position. 
  • Removable plate for easy cleanout of foot area inside ROPS/FO



A  Overall Operating Height - Fully Raised 143.9"
B  Height to Hinge Pin - Fully Raised 110"
C  Overall Height to Top of ROPS 76"
D  Overall Length with Bucket  120.3"
E  Dump Angle at Full Height 40°
F  Dump Height 83.6"
G  Dump Reach at Full Height  22.7"
J  Rollback at Ground 29°
M  Rollback Angle at Full Height 82°
O  Seat to Ground Height 33.3"
P  Wheelbase 37.6"
Q  Overall Width - Less Bucket A  52.6"
R  Bucket Width 54"
S  Ground Clearance to Chassis 7.9"
V  Overall Length - Less Bucket 92.2"
W  Departure Angle 25°
X  Clearance Circle – Front w/ Bucket 72.5"
Y  Clearance Circle – Front w/o Bucket 44.1"
Z  Clearance Circle – Rear 54"
Standard Specification Tire Size 10.00 x 16.5 HD


Make Yanmar
Model 4TNV88C-KMS
Tier IV
Gross Power @ 2500 rpm 46.6 hp
Net Power @ 2500 rpm 44.5 hp
Maximum Torque 107.8 ft.-lbs. @ 1820
Displacement 133.6

Hydraulic System

Auxiliary Hydraulics - Standard 17 gpm
High-Flow Auxiliary Hydraulics - Option  N/A
Reservoir Capacity 10 gal.

Electrical System

Battery 12-volt
Starter 12-volt
Alternator 100-amp


Rated Operating CapacityB 1,350 lbs.
Rated Operating Capacity with Optional CounterweightB 1,500 lbs.
Fuel Tank 16.5 gal.
Travel Speed - Maximum 8.0 mph
Travel Speed with Two-Speed Option - Maximum N/A
Operating WeightC - Approximate 5,130 lbs.

A - Overall width is dependent upon the amount of wheel offset.

B - Per SAE J818, SAE J732, and ISO 14397

C - Weight of base unit with standard equipment, standard tires (heavy-duty flotation), standard dirt-construction bucket and 79 kg operator.


  • brand caseih
  • brand ashland
  • brand brent
  • brand cubcadet2
  • brand gehl
  • brand geringhoff
  • brand grasshopper
  • brand greatplains
  • brand kinze
  • brand landoll
  • brand landpride
  • brand macdon
  • brand polaris
  • brand rotomix
  • brand supremeint
  • brand vermeer