Gehl R150 / NOT AVAILABLE

No Image Available
No Image Available

 

Features

Performance
The demand for a Gehl 1,500 lbs. (680 kg) capacity skid loader has been fulfilled with the introduction of the R150.

Net Power (kW) 44.5 hp (33)
Maximum Torque (Nm) 107.8 ft.-lbs. (146)
Rated Operating Capacity (kg) 1,500 lbs. (680)

Operator's Cabin
The R150 features a new, state-of-the-art, fully-adjustable operator's cab.

  • Sound reduction material within the cab suppresses outside noise for a quieter operator environment.
  • A front-lifting restraint bar with integrated armrests provides personalized comfort and increased safety.
  • Standard high-back adjustable seat and optional air-ride suspension seat or mechanical suspension seat provide enhanced, all-day comfort.
  • Cab forward design enhances view to the bucket edge. Lowered rear towers improve visibility to the rear of the machine.
  • Hydraloc™ System - Brakes and hydraulics are applied automatically whenever the operator raises the restraint bar, leaves the operator's seat or switches off the ignition.
  • Creature comforts include automatic dome light, cup holder, 12-volt outlet, storage tray and multiple adjustable air vents.

 

Controls

  • Digital color display shows real time fuel consumption, engine RPM's, machine hours, engine diagnostic codes, warning indicators and much more.
  • Three control options include T-Bar and Hand/Foot.
  • All instrumentation is conveniently located in the upper-right and left instrument panels for easy access. 
  • Hydraloc™ system applies brakes whenever the operator raises the restraint bar, leaves the operator’s seat or switches off the ignition.

 

Engine
The R150 is equipped with an all-new Yanmar Tier IV naturally-aspirated diesel engine.

  • Automatic glow plug heating system provides superior cold-weather starting.
  • After treatment meets all Tier IV requirements through proven technology.

 

Make Yanmar
Model 4TNV88C-KMS
Net Power (kW) @ rpm 46.3 hp (34.5) @ 2800
Maximum Torque (Nm) @ rpm 107.8 ft.-lbs. (146 Nm) @ 1820
Displacement (L) 133.6 cu.in. (2.19)

Hydraulics
The R135 has amped-up hydraulic systems which incorporate intuitive design for precise controllability.

  • Standard proportional auxiliary hydraulic control gives the operator the ability to adjust attachment speeds with infinitely adjustable flow control.
  • Attachments changes are clean and easy with flat-faced quick couplers that allow for changes by hand instead of tools.
  • Hardened chrome cylinder rods resist pitting, rusting and scratching, extending the life of the cylinders.

 

Auxiliary Hydraulics - Standard (L/min) 17 gpm (64.4)
High-Flow Auxiliary Hydraulics - Option (L/min) N/A
Reservoir Capacity (L) 11 gal. (41.6)

Attachment System
A full line of Edge attachments and accessories are designed specifically to fill operators’ needs, making their R150 the most versatile machine on the job site. Popular attachments are listed below.

Bale Movers
Brooms
Grapples
Pallet Forks
Mower, Rotary
Skeleton Rock Bucket
Stump Grinders
Tree Puller/Grabbing Tool

Lift Arm
The R150 features an all-new low-profile lift arm.

  • 42% more visibility with new low-profile lift arm.
  • Selectable hydraulic self-leveling option keeps the bucket level throughout the lift cycle.

 

Serviceability
Excellent service access and quality components pair up to provide durable machines that are easy to maintain.

  • Large engine cover is hinged and positioned by gas-springs to assist lifting and holding in place, and allows for easy return to closed/operating position.
  • Swing-out rear door easily opens on hinges, allowing full access to filters and fluid reservoirs, for servicing and maintenance.
  • All-new swing-out cooler provides improved access to the engine bay area.
  • Entire ROPS/FOPS assembly tilts rearward with a gas-spring assist for easy internal access to the pumps, hydraulic valve bank and drive motors.
  • All-new cab safety restraint & pull cord safely holds ROPS/FOPS in raised position. 
  • Removable plate for easy cleanout of foot area inside ROPS/FOPS

Specifications

Dimensions  
Overall Operating Height - Fully Raised 152.6"
Height to Hinge Pin - Fully Raised 118.8"
Overall Height to Top of ROPS 76.7"
Overall Length with Bucket 122.1"
Dump Angle at Full Height 38°
Dump Height 93.7"
Dump Reach at Full Height 22.8"
Rollback at Ground 28°
Rollback Angle at Full Height 99°
Seat to Ground Height 35.6"
Wheelbase 38.9"
Overall Width - Less Bucket A 63.2"
Bucket Width 61.5"
Ground Clearance to Chassis 6.3"
Overall Length - Less Bucket 93.9"
Departure Angle 21°
Clearance Circle - Front w/ Bucket 73.6"
Clearance Circle - Front w/o Bucket 45.4"
Clearance Circle - Rear 57.7"
Standard Specification Tire Size 10.00 x 16.5 HD
Engine 
Make Yanmar
Model 4TNV88C-KMS Tier IV
Gross Power @ 2500 rpm 46.6 hp
Net Power @ 2500 rpm 44.5 hp
Maximum Torque 107.8 ft.-lbs. @ 1820
Displacement 133.6 cu.in.
Hydraulic System 
Auxiliary Hydraulics - Standard 17 gpm
High-Flow Auxiliary Hydraulics - Option N/A
Reservoir Capacity 11 gal.
Electrical System 
Battery 12-volt
Starter 12-volt
Alternator 100-amp
Capacities/Weights 
Rated Operating Capacity B 1,500 lbs.
Rated Operating Capacity with Optional Counterweight B 1,650 lbs.
Fuel Tank 16.5 gal.
Travel Speed - Maximum 7.4 mph
Travel Speed with Two-Speed Option - Maximum N/A
Operating Weight C - Approximate 5,930 lbs.
A - Overall width is dependent upon the amount of wheel offset. 
B - Per SAE J818, SAE J732, and ISO 14397 
C - Weight of base unit with standard equipment, standard tires (heavy-duty flotation), standard dirt-construction bucket and 175 lb. operator. 
  • brand caseih
  • brand ashland
  • brand brent
  • brand cubcadet2
  • brand gehl
  • brand geringhoff
  • brand grasshopper
  • brand greatplains
  • brand kinze
  • brand landoll
  • brand landpride
  • brand macdon
  • brand polaris
  • brand rotomix
  • brand supremeint
  • brand vermeer