Gehl R165
Features
Performance
The Gehl R165 rounds up the mid-frame skid loader class with top-notch performance.
| Net Power (kW) | 68.4 hp (51) |
| Maximum Torque (Nm) | 178 ft.-lbs. (241) |
| Rated Operating Capacity (kg) | 1,650 lbs. (748) |
Operator's Cabin
The R165 features a new, state-of-the-art, fully-adjustable operator's cab.
- Sound reduction material within the cab suppresses outside noise for a quieter operator environment.
- A front-lifting restraint bar with integrated armrests provides personalized comfort and increased safety.
- Standard high-back adjustable seat and optional air-ride suspension seat or mechanical suspension seat provide enhanced, all-day comfort.
- Cab forward design enhances view to the bucket edge. Lowered rear towers improve visibility to the rear of the machine.
- Hydraloc™ System - Brakes and hydraulics are applied automatically whenever the operator raises the restraint bar, leaves the operator's seat or switches off the ignition.
- Creature comforts include automatic dome light, cup holder, 12-volt outlet, storage tray and multiple adjustable air vents.
Controls
- Digital color display shows real time fuel consumption, engine RPM's, machine hours, engine diagnostic codes, warning indicators and much more.
- Three control options include T-Bar, Joystick, and Hand/Foot.
- All instrumentation is conveniently located in the upper-right and left instrument panels for easy access.
- Hydraloc™ system applies brakes whenever the operator raises the restraint bar, leaves the operator’s seat or switches off the ignition.
Engine
The R165 is equipped with an all-new Yanmar Tier IV naturally-aspirated diesel engine.
- Automatic glow plug heating system provides superior cold-weather starting.
- After treatment meets all Tier IV requirements through proven technology.
| Make | Yanmar |
| Model | 4TNV98C-NMS2 |
| Net Power (kW) @ rpm | 69.9 hp (52) @ 2500 |
| Maximum Torque (Nm) @ rpm | 178 ft.-lbs. (241 Nm) @ 1625 |
| Displacement (L) | 201.4 cu.in. (3.3) |
Hydraulics
The R165 has amped-up hydraulic systems which incorporate intuitive design for precise controllability.
- Standard proportional auxiliary hydraulic control gives the operator the ability to adjust attachment speeds with infinitely adjustable flow control.
- Attachments changes are clean and easy with flat-faced quick couplers that allow for changes by hand instead of tools.
- Hardened chrome cylinder rods resist pitting, rusting and scratching, extending the life of the cylinders.
| Auxiliary Hydraulics - Standard (L/min) | 18.9 gpm (71.4) |
| High-Flow Auxiliary Hydraulics - Option (L/min) | N/A |
| Reservoir Capacity (L) | 11 gal. (41.6) |
Attachment System
A full line of Edge attachments and accessories are designed specifically to fill operators’ needs, making their R165 the most versatile machine on the job site. Popular attachments are listed below.
| A | Bale Movers |
| B | Brooms |
| C | Grapples |
| D | Pallet Forks |
| E | Mower, Rotary |
| F | Skeleton Rock Bucket |
| G | Stump Grinders |
| H | Tree Puller/Grabbing Tool |
Lift Arm
The R165 features an all-new low-profile lift arm.
- 42% more visibility with new low-profile lift arm.
- Selectable hydraulic self-leveling option keeps the bucket level throughout the lift cycle.
Serviceability
Excellent service access and quality components pair up to provide durable machines that are easy to maintain.
- Large engine cover is hinged and positioned by gas-springs to assist lifting and holding in place, and allows for easy return to closed/operating position.
- Swing-out rear door easily opens on hinges, allowing full access to filters and fluid reservoirs, for servicing and maintenance.
- All-new swing-out cooler provides improved access to the engine bay area.
- Entire ROPS/FOPS assembly tilts rearward with a gas-spring assist for easy internal access to the pumps, hydraulic valve bank and drive motors.
- All-new cab safety restraint & pull cord safely holds ROPS/FOPS in raised position.
- Removable plate for easy cleanout of foot area inside ROPS/FOPS
Specifications
| Dimensions | |
| Overall Operating Height - Fully Raised | 152.6" |
| Height to Hinge Pin - Fully Raised | 118.8" |
| Overall Height to Top of ROPS | 76.7" |
| Overall Length with Bucket | 122.1" |
| Dump Angle at Full Height | 38° |
| Dump Height | 93.7" |
| Dump Reach at Full Height | 22.8" |
| Rollback at Ground | 28° |
| Rollback Angle at Full Height | 99° |
| Seat to Ground Height | 35.6" |
| Wheelbase | 38.9" |
| Overall Width - Less Bucket A | 63.2" |
| Bucket Width | 61.5" |
| Ground Clearance to Chassis | 6.3" |
| Overall Length - Less Bucket | 93.9" |
| Departure Angle | 21° |
| Clearance Circle - Front w/ Bucket | 73.6" |
| Clearance Circle - Front w/o Bucket | 45.4" |
| Clearance Circle - Rear | 57.7" |
| Standard Specification Tire Size | 10.00 x 16.5 HD |
| Engine | |
| Make | Yanmar |
| Model | 4TNV98C-NMS2 |
| Gross Power @ 2500 rpm | 69.3 hp |
| Net Power @ 2500 rpm | 68.4 hp |
| Maximum Torque | 178 ft.-lbs. @ 1625 |
| Displacement | 201.4 cu.in. |
| Hydraulic System | |
| Auxiliary Hydraulics - Standard | 18.9 gpm |
| High-Flow Auxiliary Hydraulics - Option | Available |
| Reservoir Capacity | 11 gal. |
| Electrical System | |
| Battery | 12-volt |
| Starter | 12-volt |
| Alternator | 100-amp |
| Capacities/Weights | |
| Rated Operating CapacityB | 1,650 lbs. |
| Rated Operating Capacity with Optional CounterweightB | 1,800 lbs. |
| Fuel Tank | 16.5 gal. |
| Travel Speed - Maximum | 7.8 mph |
| Travel Speed with Two-Speed Option - Maximum | N/A |
| Operating WeightC - Approximate | 6,165 lbs. |
| A - Overall width is dependent upon the amount of wheel offset. | |
| B - Per SAE J818, SAE J732, and ISO 14397 | |
| C - Weight of base unit with standard equipment, standard tires (heavy-duty flotation), standard dirt-construction bucket and 175 lb. operator. | |















