Gehl RS8-44 Mark74

No Image Available
No Image Available




The model RS8-44 Mark74 is built with high quality components, which provides the performance to get the job done.

  • Boom tip lift hook option is now available as a factory-installed option or field installed option.
  • Proven welded box-section telescopic boom design maximizes material lift and placement.
  • Cylinder design provides one of the fastest cycle times in the industry.
  • Frame leveling feature adjusts 10-degrees to the left and right, for level performance on uneven terrain.
  • Internal wet disc brakes provide excellent braking and long life.
  • Dual-element air filter protects the engine from airborne contaminants, increasing engine performance and longevity.

Operator's Cabin

The RS8-44 Mark74 Telescopic Handler features spacious, durable operator stations to maximize comfort and productivity.

  • 44 cubic-foot cab enclosure provides optimal leg room and a spacious operating environment.
  • ROPS/FOPS canopy is standard equipment; ROPS/FOPS enclosed cab is optional.
  • Virtually 360-degree visibility increases safety and operating accuracy.
  • Deluxe high-back seat maximizes operator comfort. Adjustable suspension seat is optional.
  • Side and rear glass is standard equipment.


Three steering modes – 4-wheel, 2-wheel and crab – enhance maneuverability and are easily changed by the flip of a switch.

  • In 4-wheel steer, the machine has a 13' 8" turning radius for machine positioning on tight job sites
Turning Radius (m) 13'8" (4.2)


The RS8-44 Mark74 Telescopic Handlers provides the power to get work done effectively and efficiently.

  • Dana three-speed power-shift transmission is easy to operate.
  • Limited-slip differential in the front axle provides additional traction in muddy and unimproved surfaces.
Manufacturer Cummins
Model QSF 3.8 Tier IV
Power (kW) 74 hp (55)
Maximum Travel Speed (km/hr) 19.6 mph (31.5)
Rated Speed 2,500 rpm


The model RS8-44 Mark74 has outstanding hydraulic system and control performance.

  • Dual-function, pilot-assisted joystick is standard equipment.
  • Optional tri-function, pilot-assisted joystick allows the operator to set fork tilt and auxiliary function speeds.
  • Auto-leveling feature keeps loads level when raising/lowering the boom.
Pump Type Gear
Total Capacity (L/min) 41.5 gpm (157)
System Pressure (bar) 3,000 psi (207)
Hydraulic Reservoir Capacity (L) 45 gal. (170)


There is a tool for every job, and the RS8-44 Mark74 can power them all. Dynattach® Quick-Attach system allows quick attachment changes with unsurpassed ease.

Carriages – Masonry, framing and standard carriages available in different widths.
Rotating Carriage – 48” (1219 mm) and 66” (1676 mm) wide.
Fork Shift - 50" (1270 mm) wide.
Personnel Work Platforms - 48” x 50” x 114” (1219 mm x 1270 mm x 2895 mm) platform.
Swing Carriage – 90° and 180° swing.
Log and Pipe Grapple.
Jib Boom - 5' (1.5 m) with winch and 60' (18.3 m) cable.
Truss Boom - 15' (4.5 m) with optional winch.

Boom Tip Lift Hook

  • This factory-installed option provides a secure lifting point for transporting suspended loads without the use of an additional attachment.
  • The lift capacity remains the same as a standard carriage, while the quick attachment point increases versatility and reduces downtime.


Plenty of access points and over-sized covers make service and maintenance on the RS8-44 Mark74 quick and efficient.

  • Over-sized front cover provides easy access to the hydraulic reservoir and hydraulic pressure ports for service and testing.
  • Side-mounted fuel tank with battery access and an additional storage compartment.
  • Lockable rear-side covers located on both sides of the machine slide out of the way to expose the engine for service.
  • Shorter hoses from main valve to boom provide neat hose routing, enhancing serviceability.


Lift Capacity 8,000 lbs.
Maximum Lift Height 44'0"
Capacity at Maximum Lift Height 7,000 lbs.
Maximum Forward Reach 30'5"
Capacity at Maximum Forward Reach 1,000 lbs.
Maximum Reach Below Grade 16"
Manufacturer Cummins
Model QSF 3.8 Tier IV
Power  74 hp
Aspiration Turbocharged
Rated Speed 2500 rpm
Transmission Dana 3-speed Powershift
Maximum Travel Speed 19.6 mph
Selective Steering 4-Wheel
Brakes 4-Wheel Hydraulically Actuated Internal Wet-Disc Brake
Parking Brake Spring-Applied, Hydraulic Release (SAHR) on Front Axle
Axle Manufacturer Dana
Pump Type Gear
Total Capacity  41.5 gpm
System Pressure  3000 psi
Hydraulic Reservoir Capacity  45 gal.
General Specifications  
Approximate Weight 23,500 lbs.
Length - Less Forks 19'10"
Width 8'0"
Ground Clearance 16"
Wheelbase 10'0"
Turning Radius 13'8"
Overall Height 7'10"
Frame Leveling ±10°
Fuel Capacity 47 gal.
Tire Options 13.00 x 24/12 PR
13.00 x 24/12 PR Foam-Filled
13.00 x 24/12 PR - Rock
13.00 x 24 Solid Rubber
  • brand caseih
  • brand ashland
  • brand brent
  • brand cubcadet2
  • brand gehl
  • brand geringhoff
  • brand grasshopper
  • brand greatplains
  • brand kinze
  • brand landoll
  • brand landpride
  • brand macdon
  • brand polaris
  • brand rotomix
  • brand supremeint
  • brand vermeer