Grasshopper 124V

Double tap to zoom

 

Features

Heavy-duty Deck 

  • Extra-deep, 5.5-inch deck is fabricated from heavy-gauge formed steel with a reinforced anvil edge
  • Specially designed cutting chambers enhance airflow for better cut quality
  • Deck easily converts from side discharge to optional Down Discharge™ mulching or PowerVac™ collection
  • Sentry™ spindles with massive, 8-inch flanges anchored in a 6-bolt pattern, spread the force of impact for greater strength
  • Spindle planes are fabricated from double-layered formed steel laminate and combine with the spindles to form a triple-strength deck to keep blades level and deliver a high-quality cut.
  • Sentry™ spindle guards shield spindle housing and seal lower bearings from fiber wrap and dirt ingestion

 

Vigilant Operator Presence System™ 

  • Standard, low profile operator protection structure (OPS) with an adjustable seatbelt
  • Dampened steering levers that return to neutral from forward and reverse
  • Interlock switches that shut down the engine when the operator leaves the seat while PTO is engaged or levers are in drive position

 

B&S Commercial Turf Engine

  • 724 cc (44.2 cu. in.) Commercial Turf, V-Twin, OHV engine
  • Heavy-duty components enhance power and reliability
  • Five-step, Integrated Cyclonic Air Management System for cleaner performance
  • Extended maintenance intervals
  • Three-year limited commercial engine manufacturer warranty (see dealer for details)

 

Design-Matched Transmission

  • Design-matched, fully hydraulic Parker HT Series integrated pump-and-wheel-motor transmissions with in-line cooling fans and fine-particle filtration
  • No power-robbing gearbox or other wear parts for longer service life
  • Provides best-in-class transmission fluid change interval with no break-in period, reducing costs and maintenance time

 

Shock Impact Reduction System™(SIRS™)

  • Unrivaled comfort with iso-mounted Ultimate Suspension Ride™ scuff-resistant, Cordura®-covered, deep-cushioned, high-back seat with padded lumbar support and armrests
  • Roomy, iso-mounted, shock-absorbing footrest

 

QuikAjust® Drop Pin Height Adjustment 

  • Raise and lower the deck easily with foot pedal and drop pin for precision cutting heights between 1.0 and 5.0 inches.

 

Reduced Maintenance 

  • Only two Access-Eze™ lubrication points cut maintenance time up to 95%
  • Self-tensioning belts minimize cost and labor on routine maintenance

 

Rugged Construction 

  • Robotically-welded steel construction for long-lasting durability
  • Centered-bearing design provides greater load-bearing capacity to handle the weight of operator, fuel and high-capacity collector with reserve strength for curb shocks and weight shifts
  • Tough-as-nails powder-coated finish is fusion-bonded for chip and rust resistance

 

Ultimate Operator Station™

  • The deep-cushioned, deluxe Premium Comfort Seat features a coil-spring suspension and padded lumbar support with sliding 2-inch fore and aft adjustment for all-day comfort. Iso-mounting eliminates vibration before it reaches the seat, and both padded seat and foldable armrests are covered in scuff-resistant, breathable CoolTemp Cordura® fabric, which dissipates heat and won’t tear or crack with extended use.
  • Operational controls including throttle, ignition and push/pull PTO switches, choke, angled View-Eze™ console and adjustable cup holder are well positioned for visibility and ease of reach.
  • One- or two-handed operation with ComfortReach™ adjustable Hydra-Smooth™ dual levers that automatically return to neutral from either forward or reverse position.

Specifications

Specifications Model 124V
ENGINE  
Type/Horsepower/Cylinders B&S Commercial Turf, V-Twin
Displacement 44.2 cu. in. (725 cc)
Lubrication System Pressure Lube/Filter
Crankshaft Vertical
Cooling System Air
Fuel Gasoline - unleaded
Fuel Capacity 3 U.S. Gal. (11.4 l)
6.5 U.S. Gal. (24.6 l) (48)
Optional Fuel Capacity NA
Air Cleaner Integrated, cyclonic air cleaner with 5-step debris management system
Muffler Ultra quiet, single, industrial type.
DURAMAX® DECKS  
DECK NA
Mulching Package # 504548(41), 504551(48)
DURAMAX®; DECK SIZE  
– 41" Deck *
– 48" Deck *
CUTTING HEIGHT RANGE 1.0 to 5.0 in. (2.5 to 12.7 cm)
CONSTRUCTION (Robotic-welded steel) Double-layered 10-gauge plus 10-gauge formed-steel spindle plane 0.269 in (6.83 mm) thick with 7-gauge skirts.
BLADES (Tempered, alloy steel)  
– 41" Deck (2) 21 in. (53.5 cm)
– 48" Deck (2) 18 in. (45.7 cm)
(1) 15 in. (38.1 cm)
SPINDLE ASSEMBLIES Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Spindle head designed to eliminate fiber wrap. Double bearings, non-greasable.
SPINDLE HOUSINGS 8 in. (20.3 cm)-diameter machined aluminum housing with 6-bolt pattern.
BLADE DRIVE Belt drive with single Kevlar V-belt and idler arm tensioning.
STARTER & ELECTRICAL SYSTEM  
Battery (maintenance-free) 12 Volt
Starter Solenoid shift
Ignition Breakerless
Interlock System Prevents engine start when PTO clutch is engaged or steering levers are in drive position. Allows operator dismount without engine shutdown only when PTO is disengaged and steering levers are locked in neutral.
ULTIMATE OPERATOR STATION  
Seat Ultimate Suspension Ride (USR) deep-cushioned, high-back, foam-padded, scuff-resistant CoolTemp Cordura®-covered with padded lumbar support and armrests.
Suspension Roomy, iso-mounted footrest with Shock Impact Reduction System™ (SIRS™).
Console-mounted Instruments Digital hour meter, parking brake indicator light, ignition switch, choke and push/pull PTO switch.
Work Lights Optional - LED
Hour Meter Standard
TRANSMISSION & STEERING  
Type Design-matched hydrostatic system with in-line cooling fans. Fully hydraulic, integrated Parker HT Series transmission with variable displacement piston-type pumps and high-torque wheel motors for each drive wheel.
Filtration Internal field-serviceable filter / No break-in oil change required; best-in-class service intervals with CoolTemp Hydro-Max™ fluid.
Speed 0 - 7.5 mph (0 - 12.1 kph) forward (41) 0 - 5.5 mph (0 - 8.9 kph) reverse (41) 0 - 8.0 mph (0 - 12.9 kph) forward (48) 0 - 6.0 mph (0 - 9.7 kph) reverse( 48)
Turning Radius True zero degree, turns within own length with counter-rotating, independently powered drive wheels.
Steering One- or two-hand operation with adjustable HydraSmooth™ dual levers that automatically return to neutral from either forward or reverse position.
Brakes Dynamic braking through hydrostatic transmission.
Parking Brake Compression
TIRE SIZES  
MidMount  
Drive Wheels - Standard (4-ply rated)  
– 41" Deck 20x10x8 turf, 4-ply rated
– 48" Deck 20x10x10 turf, 4-ply rated
Front Wheels – All Models 13x5.00x6 (41)
13x6.50x6; pneumatic with greasable, double-sealed bearings to protect from grass wrap.
DIMENSIONS  
Height (Seat Back) 46.0 in. (116.9 cm) (41), 47.0 in. (119.4 cm) (48)
Height (Seat Cushion) 28.0 in. (71.1 cm) (41), 29.0 in. (73.7 cm) (48)
Height (ROPS) 57.5 in. (146.1 cm) (41), 59.0 in. (149.9 cm)(48)
Length (MidMount or FrontMount w/ DuraMax Deck)  
– 41" Deck 76.0 in. (193.0 cm)
– 48" Deck  75.0 in. (190.5 cm)
Deck Width (Side Discharge)  
– 41" Deck 54.5 in.* (138.4 cm)
– 48" Deck 61.5 in. (156.2 cm)
Deck Width (Mulch*)  
– 41" Deck 42.5 in.* (108.0 cm)
– 48" Deck 49.5 in.* (125.7 cm)
WEIGHT (Uncrate)  
– 41" Deck 700 lbs. (317.5 kg)
– 48" Deck 810 lbs. (367.5 kg)
Mulching Package  
– 41" Deck 17 lbs. (7.7 kg)
– 48" Deck 25 lbs. (11.3 kg)
  • brand caseih
  • brand ashland
  • brand brent
  • brand cubcadet2
  • brand gehl
  • brand geringhoff
  • brand grasshopper
  • brand greatplains
  • brand kinze
  • brand landoll
  • brand landpride
  • brand macdon
  • brand polaris
  • brand rotomix
  • brand supremeint
  • brand vermeer