Grasshopper 225

Double tap to zoom

 

Features

Kohler Command Pro Engine 

  • 747 cc, 2-cylinder, air-cooled Kohler Command PRO V-Twin engine

 

Design-Matched G2 Transmission 

  • Robust G2 transmission features 7-micron absolute filter and CoolFan™ hydro cooling system
  • HydroGear variable displacement 12 cc piston-pumps and high-torque Parker wheel motors
  • Provides 1,000-hour transmission fluid change interval

 

Heavy-duty Deck 

  • Extra-deep, 5.5-inch deck is fabricated from heavy-gauge formed steel with a reinforced anvil edge
  • Specially designed cutting chambers enhance airflow for better cut quality
  • Deck easily converts from side discharge to optional Down Discharge™ mulching or PowerVac™ collection
  • Sentry™ spindles with massive, 8-inch flanges anchored in a 6-bolt pattern, spread the force of impact for greater strength
  • Spindle planes are fabricated from double-layered formed steel laminate and combine with the spindles to form a triple-strength deck to keep blades level and deliver a high-quality cut.
  • Sentry™ spindle guards shield spindle housing and seal lower bearings from fiber wrap and dirt ingestion

 

QuikAjust® Drop Pin Height Adjustment 

  • Raise and lower the deck easily with foot pedal and drop pin for precision cutting heights between 1.0 and 5.0 inches.

 

Reduced Maintenance 

  • Only two Access-Eze™ lubrication points cut maintenance time up to 95%
  • Self-tensioning belts minimize cost and labor on routine maintenance

 

Rugged Construction 

  • Robotically-welded steel construction for long-lasting durability
  • Centered-bearing design provides greater load-bearing capacity to handle the weight of operator, fuel and high-capacity collector with reserve strength for curb shocks and weight shifts
  • Tough-as-nails powder-coated finish is fusion-bonded for chip and rust resistance

 

Vigilant Operator Presence System™ 

  • Standard, low profile Roll-over Protection System (ROPS) structure with an adjustable seatbelt
  • Dampened steering levers that return to neutral from forward and reverse
  • Interlock switches that shut down the engine when the operator leaves the seat while PTO is engaged or levers are in drive position

 

Ultimate Operator Station™

  • The deep-cushioned, deluxe Premium Comfort Seat features a coil-spring suspension and padded lumbar support for all-day comfort. Iso-mounting eliminates vibration before it reaches the seat, and both padded seat and armrests are covered in scuff-resistant, breathable CoolTemp Cordura® fabric, which dissipates heat and won’t tear or crack with extended use.
  • Operational controls including throttle, choke and angled View-Eze™ console and adjustable cup holder are well positioned for visibility and ease of reach
  • One- or two-handed operation with ComfortReach™ adjustable Hydra-Smooth™ dual levers that automatically return to neutral from either forward or reverse position.

Specifications

Specifications Model 225
ENGINE  
Type/Horsepower/Cylinders Kohler Command Pro, V-Twin
Displacement 45.6 cu. in/ (747cc)
Lubrication System Pressure Lube/Filter
Crankshaft Horizontal
Cooling System Air
Fuel Gasoline - unleaded
Fuel Capacity 12 U.S. Gal. (45.4 l)
Optional Fuel Capacity NA
Air Cleaner Heavy-duty, remote mounted, cyclonic, dual element air filtration.
Muffler Ultra quiet, single, industrial type.
DURAMAX® DECKS  
DECK DuraMax
Mulching Package # 504551(48), 504567(52)
DURAMAX®; DECK SIZE  
– 41" Deck NA
– 42" Deck NA
– 44" Deck NA
– 48" Deck *
– 52" Deck *
– 61" Deck NA
– 72" Deck NA
CUTTING HEIGHT RANGE 1.0 to 5.0 in. (2.5cm to 12.7 cm)
CONSTRUCTION (Robotic-welded steel) Double-layered 10-gauge plus 7-gauge formed-steel laminated spindle plane 0.313 in (7.95 mm) thick - more than 25% thicker than 0.25 in. (6.35 mm) with 7-gauge skirts for geometric strength. Spindle plane is 0.9 in.(22.86 mm) thick in stress zones. Anvil-
BLADES (Tempered, alloy steel)  
– 41" Deck NA
– 42" Deck NA
– 44" Deck NA
– 48" Deck (2) 18 in. (45.7 cm) (1) 15 in. (38.1 cm)
– 52" Deck (3) 18 in. (45.7 cm)
– 61" Deck (3) 21 in. (53.3 cm)
– 72" Deck NA
SPINDLE ASSEMBLIES Sentryô Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Double bearings greasable from top of deck. Spindle head designed to eliminate fiber wrap. Spindle cones shield housing and lower bearings from fiber wrap and dirt ingestion.
SPINDLE HOUSINGS Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Double bearings greasable from top of deck. Spindle head designed to eliminate fiber wrap. Spindle cones shield housing and lower bearings from fiber wrap and dirt ingestion.
BLADE DRIVE Belt drive with single Kevlar V-belt and idler arm tensioning.
TRIMABILITY (Outside of std. tire to left trim side)  
– 41" Deck NA
– 42" Deck NA
– 44" Deck NA
– 48" Deck NA
– 52" Deck NA
– 61" Deck NA
– 72" Deck NA
STARTER & ELECTRICAL SYSTEM  
Battery (maintenance-free) 12 Volt
Starter Solenoid shift
Ignition Breakerless
Interlock System Prevents engine start when PTO clutch is engaged or steering levers are in drive position. Allows operator dismount without engine shutdown only when PTO is disengaged and steering levers are locked in neutral.
ULTIMATE OPERATOR STATION  
Seat Ultimate Suspension Ride (USR) iso-mounted, high-back, deep-cushioned, foam-padded, CoolTemp Cordura-covered, padded arms/backrest with lumbar support and coil-spring suspension. Optional CoolTemp Cordura-covered premier suspension seat.
Suspension InFrame™ suspension with iso-mounted seat and footrest
Console-mounted Instruments Low engine oil pressure light, digital hour meter, parking brake indicator light, ignition switch and push/pull PTO switch. Choke integrated with throttle lever.
Work Lights Optional - LED
Hour Meter Standard
TRANSMISSION & STEERING  
Type Design-matched G2 hydrostatic system with auxiliary cooling fans, HydroGear variable displacement 12 cc piston-type pumps and high-torque Parker wheel motors.
Filtration  
Speed (48-) 0 - 8.5 mph (0 - 13.7 kph) forward (52-) 0 - 9.0 mph (0 - 14.5 kph) forward 0 - 6.0 mph (0 - 9.7 kph) reverse
Turning Radius True zero degree, turns within own length with counter-rotating, independently powered drive wheels.
Steering One- or two-hand operation with adjustable HydraSmooth™ dual levers that automatically return to neutral from either forward or reverse position.
Brakes Dynamic braking through hydrostatic transmission.
Parking Brake Disc parking brakes, one for each drive wheel.
Attachment Drive NA
TIRE SIZES  
MidMount  
Drive Wheels - Standard (4-ply rated)  
– 41" Deck NA
– 42" Deck NA
– 44" Deck NA
– 48" Deck 23x9.50x12 turf, 4-ply rated
– 52" Deck 23x10.50x12 turf, 4-ply rated
– 61" Deck 24x12.00x12 turf, 4-ply rated
– 72" Deck NA
Drive Wheels – Optional (4-ply rated) (61-) 24x12.00x12 bar tread, 4-ply rated
Front Wheels – All Models 13x6.50x6; rib tread, pneumatic with greasable, double-sealed bearings to protect from grass wrap.
DIMENSIONS  
Height (Seat Back) 46.5 in. (118.1 cm)
Height (Seat Cushion) 31.0 in. (78.7 cm)
Height (ROPS) 70.0 in. (177.8 cm)
Length (MidMount w/ DuraMax® Deck - Mowing Position)  
– 41" Deck NA
– 42" Deck NA
– 44" Deck NA
– 48" Deck 76.5 in. (194.3cm) 
– 52" Deck 76.5 in. (194.3 cm)
– 61" Deck 78.0 in. (198.1 cm)
– 72" Deck NA
Deck Width (Side Discharge)  
– 41" Deck NA
– 42" Deck  
– 44" Deck NA
– 48" Deck 61.5 in. (156.2 cm)
– 52" Deck 65.5 in. (166.5 cm)
– 61" Deck NA
– 72" Deck NA
Deck Width (Mulch*)  
– 41" Deck NA
– 42" Deck NA
– 44" Deck NA
– 48" Deck 49.5 in.* (125.7 cm)
– 52" Deck 53.5 in.* (135.8 cm)
– 61" Deck 62.5 in.* (158.8 cm)
– 72" Deck NA
WEIGHT (Uncrated)  
– 41" Deck NA
– 42" Deck NA
– 44" Deck NA
– 48" Deck 1050 lbs. (476.3 kg)
– 52" Deck 1070 lbs. (485.4 kg)
– 61" Deck 1120 lbs. (508.0 kg)
– 72" Deck NA
Mulching Package  
– 41" Deck NA
– 42" Deck NA
– 44" Deck NA
– 48" Deck 25 lbs. (11.3 kg)
– 52" Deck 29 lbs. (13.2 kg)
– 61" Deck 36 lbs. (16.3 kg)
– 72" Deck NA
  • brand caseih
  • brand ashland
  • brand brent
  • brand cubcadet2
  • brand gehl
  • brand geringhoff
  • brand grasshopper
  • brand greatplains
  • brand kinze
  • brand landoll
  • brand landpride
  • brand macdon
  • brand polaris
  • brand rotomix
  • brand supremeint
  • brand vermeer