Great Plains 8552DV
MAX-MIX™ SHANK PATTERN
With a true four-bar design, shanks on the first and second bars are split by the third and fourth bars. On an effective 7" spacing, no shank is closer than 28" on any bar. The Max-Mix shank design evenly spreads residue and uniformly incorporates fertilizer or manure for even distribution. True, one-pass tillage eliminates the cost of owning several tillage tools.
HYDRAULIC COULTER/DISC GANG OPTION
Adjust residue coverage levels on-the-go to meet government requirements on HEL ground. Choose from either the coulter option, exclusive to Great Plains units, to run at faster ground speeds or a shallow concave disc option, used to feather worked soil into tractor track impressions left in softer soils. Accomplish excellent penetration and soil movement with 8" blade spacing.
A clean, narrow-profile, self-leveling hitch design with turnbuckle height leveling adjustment.
EXCLUSIVE MAINTENANCE-FREE BEARINGS
These 360° self-aligning bearings are never sideloaded. A six-lip seal on each side locks in grease and prevents contamination, which reduces maintenance time and extends the life of the bearings.
REBOUND VALVE AND SINGLE-POINT DEPTH CONTROL
The highly efficient hydraulic rebound valve provides precise operating depth and keeps the machine running level, which extends the life of the entire hydraulic system. The pressure-reducing valve limits hydraulic cylinder pressure, and the counter-balance valve prevents air from passing through seals and into the system. This valve shines in fields where the machine needs to be raised and lowered numerous times.
NEW KNOCK-ON SWEEPS (OPTIONAL)
Quick-change system for installation and removal of sweeps. Once installed, change sweeps with a special tool and hammer.
Keeps implement level regardless of undulations in terrain.
CHOOSE YOUR SHANK & SWEEPS
Heavy-duty K-flex shank (left) has 185 lbs. of point trip force. Spring-loaded Magnum shank (right) has 205 lbs. of point trip force. Both shank styles are available in minimum draft or flat lower shanks. Sweep choices are either 9" regular or 9" hard-faced.
CHOOSE YOUR DISC BLADES
Pick Turbo coulters (exclusive to Great Plains) or rippled coulters to size residue and run at faster ground speeds, or opt for 20" shallow-concavity discs to feather worked soil into ruts and wheel tracks.
CHOICE OF REAR FINISHING ATTACHMENTS
Add finishing touches to the ultimate seedbed with 5- to 7-bar spike or coil tine and reel combinations. Higher tillage speeds make leveling a bigger task. With the heavy-duty 3-bar spike and reel, front rigid tines aggressively attack the ridge formed by the last row of shanks. Then, two rows of heavy-duty, high-residue spikes follow to feather out the residue and soil. The reel finishes by firming loose soil, providing an outstanding finishing touch for a one-pass tool.
|NUMBER OF BLADES||76|
|NUMBER OF SWEEPS||89|
|WEIGHT (approx lbs)||21,632|
|PTO H.P. REQ (min)||375+|
|TILLAGE WIDTH||50' 9"|
|TRANSPORT WIDTH||18' 3"|
|TRANSPORT HEIGHT||14' 9"|
|1ST WING SECTION||10' 9"|
|2ND WING SECTION||9' 3"|