Land Pride SBL2566

No Image Available
No Image Available



Features Benefits
Large main housing Ability to handle large drifts.
Large impeller diameter The ability to move and throw material farther.
Level run indicator
Operator can visually verify the Snow Blower is properly leveled before each use. Protects against tilting the auger into concrete/paved surfaces.
Hydraulically operated
deflector spout
Allows operator to change end of spout up or down from the seat to direct blown snow up close or far away.
Hydraulically operated chute
rotation with sprocket drive
Allows operator to change direction of snow discharge from the seat. Sprocket drive is built to last.
Bolt-on reversible and
replaceable cutting edge
Improves service life of Snow Blower by protecting the unit from bottom wear and
absorbing some of the shock when hitting solid objects. The blade can be rotated 180o to
double its life and can be replaced when both edges are worn out.
Greasable auger end bearing Less drag on the powertrain and extends life of unit.
Sprocket driven chute rotator Allows operator to change chute rotation angle within a 220o discharge pattern.
3/8" Auger Flighting Stands up to sever use.
Quality hydraulic motor available in low, medium, or high volume flow Provides long life, durable construction. Three flow options allow this Snow Blower to fit many skid steer/tractors.
Bolted-on outer skid shoes Supports cutting-edge above paved, gravel, and rocky surfaces.
They are adjustable and replaceable.
Inner skid shoes secured with a bent pin. Supports cutting-edge above paved, gravel, and rocky surfaces.
Bent pin makes it easy to change skid shoe height and replace.


Specifications & Capacities SBL2566
Working Width 66 (1.68)
Overall Width 71 1/2 (1.82)
Weight with outside skid shoes, case drain line, couplings, & hydraulic motor 816 (370)
Drive and Control System Hydraulic motors with electric over hydraulic
Hydraulic Requirements:
Low Volume Motor Option
Medium Volume Motor Option
High Volume Motor Option

12-19 (45.4-71.9)
20-26 (75.7-98.4)
27-33 (102.2-124.9)
Hydraulic Pressure Rating 2500-3500 (17.2-24.1)
Hitch Skid steer/loader mounting plate
Main Housing Material 10 (3.4)
Side Plate Material 3/16 (5)
Chute Opening at the Base 10 (25.4)
Impeller Housing Depth 8 (20.3)
Impeller Diameter 24 (61)
Number of Impeller Blades 4
Auger Diameter 16 (40.6)
Number of Auger Paddles 4
Cutting edge Bolt-on, reversible, and replaceable full-length cutting edge
Skid Shoes Bolt-on, adjustable & replaceable
Chute Rotation 220 Degrees (Hydraulically driven sprocket)
Spout Deflector Hydraulic operation
Spout Deflector Cylinder Double acting 2 x 4 x 1 1/2 (5.1 x 10.2 x 3.8) rod
  • brand caseih
  • brand ashland
  • brand brent
  • brand cubcadet2
  • brand gehl
  • brand geringhoff
  • brand grasshopper
  • brand greatplains
  • brand kinze
  • brand landoll
  • brand landpride
  • brand macdon
  • brand polaris
  • brand rotomix
  • brand supremeint
  • brand vermeer