|Low volume motor @ 11-17 gpm Medium volume motor @ 18-23 gpm High volume motor @ 24-30 gpm
|Customer can choose one of three optional motors for his SC2560 cutter or one of three optional motors (low, medium and high volume) for his SC2572 cutter. This allows the cutter to fit a wide variety of Skid Steers. Also the deck can be upgraded to a different motor when owner upgrades his Skid Steer
|1/4" Side panels for overall reinforcement
|Protects sides from debris being thrown against them from the blades.
|Front and rear chain shields
|Single chain on the front and double chain on the rear. Reduces flying debris.
|Replaceable skid shoes (optional)
|Protect side plate structure. Shoes are replaceable for convenience.
|Splined blade bar
|Allows for tight positive fit of stump jumper and blade bar to motor output shaft.
|3/16" Round stump jumper
|Standard stump jumper aids in sliding over obstructions, which helps protect gearbox output shaft.
|1/2" x 4" Heat-treated free swinging blades
|Heat-treated blades offer longer life.
Free-swinging blades protect from obstructions
|2" Diameter cutting capacity
|Can aid in clearing brush.
|SC2560 High blade tip speed
|Low volume motor = 17,939 fpm at 17 gpm.
Medium volume motor = 19,142 fpm at 23 gpm.
High volume motor = 19,390 fpm at 30 gpm.
|Offset hitch (8 1/2" to the right)
|Allows the operator to cut close to obstacles on the right side.
|Optional front gauge wheel
|Provides easy operation and handling over uneven terrain, laminated tire can’t go flat.
|Floating hitch mounting plate
|Allows smoother travel over rough terrain with the optional gauge wheel easing the fatigue put on the operator
|Motor pressure gauge
|Allows the operator to ensure that the motor is operating at proper psi.
|Lift limit safety chain
|Provides additional operator protection from flying objects by allowing the Rotary Cutter to only be lifted up to 18".