Land Pride TE3596

Double tap to zoom

 

Features

Features Benefits
Reinforced 7 gauge (4.6 mm) moldboard design Provides added strength and durability.
Choice of 96"(2.44m) or
108" (2.74 m) working widths
Allows customers to choose the cutting edge that meets their operational needs.
Double acting angling cylinders Easily enables up to 30 degrees of angling to left or right distributing the material where you want it to go.
Cushion valve Protects hydraulic cylinders and frame against hydraulic pressure spikes exceeding 1600 psi (11 mPa) caused when striking solid objects at the outer ends of the cutting edge.
Trip edge design with adjustable springs Protects the structural integrity of the cutting edge while still maintaining load control no matter what the bottom edge encounters.
Easy attach mounting system Designed for skid steer loaders with skid steer type mounting plates.
Rotational free pivot float action cutting edge design Allows cutting edge to rotate on its mounted trunnion keeping the cutting edge in uniform contact with the ground.
Pivot float lock Keeps cutting edge level when in transport for better operator visibility and safer handling.
Cast grip steps Provides for safer and easier mounting and dismounting by the operator with the Trip Edge Blade attached.
30" (76.2 cm) overall moldboard height Provides ability to perform in deep snow conditions.
Replaceable cutting edge Offered in steel or heavy-duty poly construction to match ground & surface operating conditions.
Abrasion Resistant Skid shoes Offered as standard equipment. Abrasion resistant to last longer. Establish lower limits of cutting edge operation to prevent surface gouging or cutting too deep.
Optional cable filled orange markers Provides operator with improved awareness and visibility of outermost edges of the moldboard and cutting edge to prevent unwanted contact with ground obstacles. Filled with a steel cable for longer life
Optional top-mounted rubber deflector Helps prevent snow from over-topping the moldboard in deeper snow conditions.

Specifications

Model Number TE3596
Skid steer horsepower Minimum 60 hp (45 kW)
Maximum 100 hp (75 kW)
Hitch type Skid steer type quick attach, meets ISO 24410
Hitch mounting steps Serrated
Moldboard construction 7 Ga. (4.6 mm) Steel
Moldboard height 30" (76.2 cm)
Maximum cutting width 96" (2.44 m)
Cutting width @ 30o angle 83" (2.11 m)
Maximum pivot angle 30o left & 30o right
Hydraulic angle cylinders Two double acting cylinders, 2 1/2" bore x 8" stroke
Maximum hydraulic pressure rating
Hydraulic cylinders
Hydraulic hoses and fittings

3500 psi (24.1 mPa)
4000 psi (27.6 mPa)
Maximum float angle Floats on the skid shoes 5o clockwise & 5o counterclockwise
Trip Edge Blade pivot pin sizes
Angle pivot pin
Float pivot pin

1.75"
2"
Cutting edge options 5/8" (16 mm) x 8" (20.3 cm) high carbon steel
1" (2.5 cm) x 8" (20.3 cm) ultra-high-molecular-weight polyethylene (UHMW)
Cutting edges are reversible and replaceable
Trip Edge Blade protection Adjustable spring-loaded, trip edge
Trip release pressure 1800 lbs (816 kg)
Skid shoes Adjustable, constructed of 5/8" (16 mm) abrasion resistant steel
Base equipment weight 1114 lbs (505.3 kg)
Optional equipment weight
Steel cutting edge
Poly cutting edge
Deflector
Blade marker

138 lbs (62.6 kg)
51 lbs (23.1 kg)
24 lbs (10.9 kg)
2 lbs (.9 kg)
  • brand caseih
  • brand ashland
  • brand brent
  • brand cubcadet2
  • brand gehl
  • brand geringhoff
  • brand grasshopper
  • brand greatplains
  • brand kinze
  • brand landoll
  • brand landpride
  • brand macdon
  • brand polaris
  • brand rotomix
  • brand supremeint
  • brand vermeer