Land Pride BB0548

No Image Available
No Image Available



3/16” Side panels Strongest in this class.
Square tubing shank support Many competitors use angle iron. Box tubing is stronger.
Clevis -type lower 3-point hitch Much stronger than pin type hitch.
3-Position heat treated spring steel shanks Offers flexibility for deep to shallow settings and Heat-treated for longevity.
Working widths 48", 54"
HP Range 17-25 HP
Bump-formed moldboard While scraping, this allows the dirt to roll off the moldboard creating less drag resulting in lower HP requirements and faster working conditions.
12 3/4” Moldboard height Box Scraper can hold a lot of material.
Moldboard Heavy moldboard with precise roll holds its shape under heavy loads.
Heat-treated, dimpled-on tips Easy to replace tips that are heat treated for toughness.
Heat-treated, reversible and replaceable cutting blades Heat-treated for hardness. Reversible so both edges can be used before replacing the cutting blades.
Rear backfill blade Rear backfill blade allows for backfilling trenches or foundations.
Cat. 0, Cat.1 & Cat. Limited with Quick Hitch capability Fits a wide variety of tractors. Quick hitch capability allows for easy hook-up.
Two welded braces extending from front to rear of bucket These braces help keep the Box Scraper square under heavy loads.


Model BB0548
Working Width 48"
Capacity 7 cu. ft.
Weight 277 lbs.
Number of Shanks 4
Shank Material 3/4" x 2 1/2" x 15" heat treated spring steel
Shank Penetration 2- positions (Out of the ground or 2 3/8" below scraper end plates)
Shank Tip Construction Replaceable heat treated dimpled-on tips
Shank Beam 4" x 4" x 1/4" Square Tubing
Lift Mechanism Manual lift with spring retainer at each shank
Moldboard Bumped-formed moldboard -13 5/16" high
Side Panels 3/16" thick x 12 3/4" high x 20" deep
Depth of Bucket 18 1/2"
Bucket Reinforcement Two welded braces to rear of moldboard
Cutting Blades 2 ea. 1/2" x 6" high carbon, heat treated cutting edges; reversible and replaceable
Maximum H.P. Rating 25 HP
A-Frame Material 3/8" x 3" C1021
3-Point Hitch Type Clevis type lower hitches
Cat. 0, Cat. I & Cat. I Limited (Fits Land Pride Quick Hitch)
  • brand caseih
  • brand ashland
  • brand brent
  • brand cubcadet2
  • brand gehl
  • brand geringhoff
  • brand grasshopper
  • brand greatplains
  • brand kinze
  • brand landoll
  • brand landpride
  • brand macdon
  • brand polaris
  • brand rotomix
  • brand supremeint
  • brand vermeer