Land Pride MR1572
|3/8" Heavy side panels||Built heavy to handle the tough jobs.|
|Mechanical vertical lift shank tube
or hydraulic pivot shank tube
|Retractable mode can be purchased with manual or hydraulic option.|
|Clevis type lower 3-point hitch||Allows for easier hook-up of the tractor’s lower draft arms.|
|4 Positions heat treated
spring steel shanks
|Offers flexibility for deep to shallow settings and Heat-treated for longevity|
|Working widths||MR1572 = 72"
HR2572 = 72"
|HP range||MR1572: 20-40 hp 4 wheel drive; 30-50 Hp 2 wheel drive
HR2572: 30-60 hp 4 wheel and 2 wheel drive
|Roll-formed moldboard||Roll-formed moldboard keeps materials flowing which puts less drag on the Box Scraper, resulting in lower HP requirements and faster working conditions.|
|19" High MR1572 moldboard
21" High HR2572 moldboard
|High material capacity|
|Heat treated dimpled on tips||Easy to replace tips that are heat treated for toughness.|
|Heat-treated, reversible and
replaceable cutting edges
|Heat-treated for hardness. Reversible so both edges can be used before replacing the
|Rear backfill blade||Rear backfill blade allows for backfilling trenches or foundations.|
|Warranty||One year parts & labor.|
|Category I 3-point hitch
with Quick Hitch capability
|Fits a wide variety of tractors.
Quick hitch capability allows for easy hook-up.
|Positive Locking System||Shanks are kept in the up or down position with a positive locking system. This keeps
the scarifier bar from bouncing in transport, and tight during field use.
|Heavy duty Shank bumpers
|3/4" x 7/8" U-shaped steel bumpers are built tough to support the shank load.
1/2" Square steel bumpers behind each shank provides additional reinforcement.
|Capacity||16 cu. Ft.|
|Number of Shanks||7|
|Shank Material||3/4" x 2 9/16" heat treated spring steel|
|Shank Penetration||2- Position: 5/8" & 2 5/8" below end plates|
|Shank Tip Construction||Replaceable heat treated dimpled-on tips|
|Shank Beam||4" x 4" x 5/16" Square tubing reinforced with shank support lugs at each shank|
|Left Mechanism||Mechanical lever lift with spring assist|
|Moldboard||Roll-Formed Moldboard - 18 1/2" high|
|Side Panels||3/8" thick x 18" high x 27 1/2" deep|
|Depth of Bucket||24"|
|Cutting Blades||2 ea. 1/2" x 6" high carbon, heat treated cutting edges; reversible and replaceable|
|Maximum H.P. Rating||40 HP for 4 wheel and 50 Hp for 2 wheel tractors|
|3-Point Hitch Type||Category I (Fits Land Pride Quick Hitch)|