Land Pride AFM4211
|LED Signal lights||LED lights are bright, long lasting, and resistant to vibration, unlike incandescent
|Counter blade rotation on left hand deck||Spreads grass clippings more evenly. Wing decks throw grass away from the rear deck.
Rear deck doesn't get covered up nor does it get bogged down by cut grass.
|7'-8" transport width at lowest cutting height||Meets most city/county codes for transport width.|
|6" Deck overlap||Eliminates skipping when going into a tight turn.|
|11'-1" Cutting width - three 48" decks||Sized right for golf courses, cities, schools.
Small decks give excellent flexibility.
|Sleek frame design, including single beam hitch and compact deck overlap||Design allows operator to make tighter turns without leaving windrows and skips.
AFM virtually becomes a zero turn mower. (Oversized tires may not allow this.)
|Automatic transport wing locks||When wings are raised in the full transport position, the wings lock in place.
No need to get off the tractor to lock. Pull rope from tractor seat to un-lock.
|18" Transport tires with tapered roller bearings||Transport tires offer smooth roading and less grass compaction.
Allows grass to stand up. Tapered roller bearings offer longevity.
|Removable transportation tire spindles||Allows a spindle to be replaced by simply removing two bolts.|
|Back wheels on side decks even with transportation tires||Allows tighter turns without skips.|
|Rigid rear side deck tires||Rigid wheel yokes holds hills and slopes better.
Safer unit than the competition.
|13" Deck tires with sealant||13" Tires offer great flotation, less lbs. per square inch.
Sealant minimizes flats.
|1/4" Gauge wheel arms||Gives the mower gauge wheel arms a great deal of "hidden" strength.|
|Low pivot points on deck||The lower the pivot points are to the ground, the more side to side swing,
allowing for excellent flotation from each deck.
|Deflectors built into mower decks||Safety features meet ANSI standards. Many competitors use chains for protection.
Once chains are removed the unit does not meet ANSI specifications.
|Rear discharge||Even dispersal, discharged items are aimed downward.
No rear chains are needed, which tend to clump damp grass.
|Rounded front deck edges with no protruding skid shoe||Helps protect trees and other obstacles.|
|5/16" Front edge & all-welded seams||Provides extra durability.|
|Cat. 3 Constant velocity main driveline||Constant velocity main driveline allows for tighter turns without harming U-joints in driveline, includes slip clutch.|
|Slip-clutch protection||Guards against premature gearbox failure.
Protects mower deck spindles.
|Cat. 2 wing drivelines||Reduces start-up torque that is put on the driveline, gearbox and gearbox support.|
|ABS guards||No paint to scratch off, lighter weight, no rattling or rust.|
|Heavy gearbox mounts on center and side mower decks||Handles start-up torque better.|
|Gearbox HP Rating||30 -65 HP|
|Gearbox warranty||5 years on parts and labor.
Demonstrates our confidence in the gearbox’s quality and lasting performance.
|Easy to grease blade spindles||No guards to remove for routine greasing of blade spindles.|
|Middle spindle sits towards the back of the mower deck||Uses less horsepower and allows material to escape the mower deck easier.
The discharge of material is more even.
Design eliminates windrowing.
|Spring loaded idlers||Applies constant tension to belt to run efficiently.|
|Easy belt tension release||Easily release belt tension for changing belt or for winter storage.|
|High blade tip speed||(16,260 fpm) Lifts grass up for a clean cut and efficient discharge of material.
Tip speed rates are as high or higher than the competition.
|Choice of Blade|
|Low Lift Blades||Highly recommended in sandy soils where lifting isn't crucial.
Disturbs the soil very little, allowing blades to wear longer.
|Medium Lift Blades||Medium suction for lifting grass. Requires less HP than high lift.|
|High Lift Blades||Greatest suction for lifting grass before cutting.
Can take higher HP in tall dense grass. Not recommended in sandy soils.
|Mulching Blade||Perfect for leaf mulching.|
|Optional Hydraulic Operated Transport
|Transports locks can be released easily from the tractor seat while operating the
same tractor control lever that raises and lowers the mower decks. Eliminates
pulling a rope to release transport locks.
|Cutting Width||11' - 1"|
|Overall Width||11'- 3 1/2"|
|Transport Height||5' - 11 1/2"|
|Transport Width||7'-8" At Mid Cutting Height|
|Overall Length||13'- 3" Transport Position|
|Tractor Horsepower||Minimum 30 HP and Maximum 65 HP|
|Hitch||Pull Type With Adjustable Clevis and Safety Tow Chain|
|Tongue Support||2,200 lb. Capacity Screw Jack|
|Gearbox Support||3/8" Steel Channel|
|Gearboxes||540 RPM (1)-Splitter Gearbox and (3)-Wing Gearboxes|
|Gearbox Lubrication||Gear Lube 80-90W EP|
|Gearbox Oil Capacity|| 3 - Wings: 3.5 pints
SD Splitter: 2.125 pints or OMNI Splitter: 2.5 pints
|Main Drive-line||(1) Category lll Constant Velocity With Slip Clutch|
|Deck Drive-lines (3)||Category II|
|Cutting Height||1" to 5 1/2" in 1/4" increments|
|Deck Size and Quantity||3 each at 48"|
|Anti-Scalp Roller||Front Center and Rear Outside Deck Corners|
|Blade Drive Belt||(1) - B-Section|
|Drive Belt Tensioning||Spring Loaded Idler|
|Blade Bearings||Sealed Ball Bearings|
|Blades Size and Type||1/4" x 2 1/2" x 16 7/8" Medium Lift Standard|
|3 Each Per Deck||Optional Blades - Low Lift, High Lift & Mulching|
|Blade Overlap||1 3/16"|
|Blade Spindle Speed||3,628 RPM|
|Blade Tip Speed||16,020 FPM|
|Deck Tires||10 Each, Air 13" x 5", Sealant With Tapered Roller Bearings|
|Deck Wheel Spindles||1 1/4" With Nylon Bushings|
|Transport Tires||2 Each, 18" x 9.5", Sealant With Tapered Roller Bearings|
|Transport Locks||Automatic Transport Locks With Pull Rope Release|
|Wing Flex||23 Degrees Left To Right
22 Degrees Front To Back
|Center Deck Flex||13 Degrees Front To Back|
|Hydraulic Outlets||1 Set Required|
|Deck Cylinders||Dual Acting|
|Gauge Wheel Arms||1/4" Wall Square Tubing|
|Turning Radius||Zero Turning Radius|
|Mowing Capacity||@ 2 MPH = 2.68 Acres Per Hour
@ 4 MPH = 5.37 Acres Per Hour
@ 6 MPH = 8.10 Acres Per Hour
|7 Pin connector||SAE J560 pin configuration|