Land Pride AFM4214

No Image Available
No Image Available

 

Features

FEATURES BENEFITS
LED Signal lights LED lights are bright, long lasting, and resistant to vibration, unlike incandescent
counterparts.
Counter rotation on left hand deck Spreads grass clippings more evenly. Wing decks throw grass away from the rear deck. Rear deck doesn't get covered up nor does it get bogged down by cut grass.
Narrow 6'-8" transport width Not much wider than most tractors, making for safer transport. Meets most city/county codes for transport width
6" Deck overlap (AFM4214) Eliminates blade skips when turning. Tighter turns can be made.
Sleek frame design, including single beam hitch and compact deck overlap Design allows operator to make tighter turns without leaving windrows and skips. The AFM virtually becomes a zero turn mower.
Automatic transport wing locks When wings are raised in the full transport position, the wings lock in place, no need to get off the tractor to lock. Pull rope from tractor seat to unlock.
23" Transport tires with tapered bearings 23" Transport tires offer smooth roading and less grass compaction. Allows grass to stand up. Tapered roller bearings offer longevity.
Removable transportation tire spindles Allows a spindle to be replaced by simply removing two bolts.
Back wheels on side decks even with transportation tires Allows tighter turns without skips.
Rigid rear side deck tires Rigid wheel yokes holds hills and slopes better. Safer unit than the competition.
Large deck flotation tires with sealant Optional 15" tires for great flotation or 18" tires for even greater flotation. The larger the tire the less compaction in pounds per square inch allowing grass to stand up. Sealant in the tires minimizes flats.
1/4" Gauge wheel arms Gives the mower gauge wheel arms a great deal of "hidden" strength.
Low pivot points on deck The lower the pivot points are to the ground, the more side to side swing, allowing for excellent flotation from each deck.
Deflectors built into mower decks Safety features meet ANSI standards. Many competitors use chains for protection. Once chains are removed the unit may not meet ANSI specifications.
Rear discharge Even dispersal, discharged items are always aimed downward. No rear chains are needed, which tend to clump damp grass.
Cat. 4 CV main drive-line Constant velocity main drive-line allows for tighter turns without harming U-joints in drive-line, includes slip clutch.
Slip clutch protection Guards against premature gearbox failure. Protects mower deck spindles.
Cat. 2 wing drive-lines Reduces start-up torque that is put on the drive-line, gearbox and gearbox support.
Heavy gearbox mounts on center and side mower decks Handles start up torque.
Gearbox horsepower rating 40 - 70 hp
Gearbox warranty 5 years on parts and labor.
Demonstrates our confidence in the gearbox’s quality and lasting performance.
Easy to grease blade spindles No guards to remove for routine greasing of blade spindles.
Middle spindle sits towards the back of the mower deck Uses less horsepower and allows material to escape the mower deck easier. The discharge of material is more even. Design eliminates windrowing.
Spring loaded idlers Applies constant tension to belt to run efficiently.
Easy belt tension release Easily release belt tension for changing belt or for winter storage.
High blade tip speed (AFM4214 = 18,396 fpm) Lifts grass up for a clean cut
and efficient discharge of material. Tip rates as high or higher than the competition.
Choice of Blade (Low lift standard, Others available thru parts dept.) 
Low Lift Highly recommended in sandy soils where lifting isn't crucial. Disturbs the soil very little, allowing blades to wear longer.
Medium Lift Medium suction for lifting grass. Requires less HP than high lift.
High Lift Greatest suction for lifting grass before cutting. Can take higher HP in tall dense grass. Not recommended in sandy soils.
Mulching Perfect for leaf mulching.
Optional Hydraulic Operated Transport Locks Transport locks can be released easily from the tractor seat while operating the same tractor control lever that raises and lowers the mower decks. Eliminates pulling a rope to release transport locks.

Specifications

Model AFM4214
Horsepower 40-70 HP
Hitch Pull-Type, Adjustable Clevis & Safety Tow Chain
Working Width (cm) 14' (427)
Overall Width 14' 3"
Transport Width 7' 11"
Positive Tongue Wt - lb 540
Weight - lb (kg) (w/15" tires) 3,000 (1,361)
Cutting Height 3/4" - 5-1/4" in 1/4" incr.
Wing Cylinders 2-1/2" x 12"
Rear Deck Cylinder 2-1/2" x 8"
Gearbox 540 RPM, 3 Wing, 1 Splitter
Decks: 3 each 60"
Deck Thickness 3/16"
Deck Overlap 6"
Deck Spindle Housing Cast Iron Greaseable Hubs
Blade Size 5/16" x 2-1/2" x 20-29/32"
Blade Overlap 1-1/4"
Blade Tip Speed 18,396 fpm
Blade Bearings Greaseable Ball Bearings
Blade Spindles 1-3/8" Stressproof® Shaft
Blade Spindle RPM 3,362
Drive Train 540 RPM B-section V Belt
Discharge Rear
Deck Tires - 10 total 15 x 6.6 Air Tire, Sealant or 18 x 9.5 Air Tire, Sealant
Deck Wheel Spindles 1-1/4" w/Nylon Bushings
Transport Tires and Bearing 23 x 10.5, Sealant Tapered Bearings
Anti-Scalp Roller Front Center and Outside Deck Corners
Input Drive-line Cat. 4 CV w/Slip-Clutch
Deck Drive-line Cat. 3
Mowing capacity @ 2 mph
@ 4 mph
@ 6 mph
3.39 Acres/hr
6.78 Acres/hr
10.17 Acres/hr
Flex - Wings 23° L-R, 22° F-B
Flex - Center 10° L-R, 22° F-B
Transport Lights Standard
Color Tan or Orange
  • brand caseih
  • brand ashland
  • brand brent
  • brand cubcadet2
  • brand gehl
  • brand geringhoff
  • brand grasshopper
  • brand greatplains
  • brand kinze
  • brand landoll
  • brand landpride
  • brand macdon
  • brand polaris
  • brand rotomix
  • brand supremeint
  • brand vermeer