Land Pride DB2660
|Tractor HP Range||Designed for 75-150 HP tractor with minimum weight of 7,000 lbs.|
|Gearbox HP Rating||150 HP|
|3 Point Design||Does not require a dedicated tractor. Three point hook up is easy to hook up and
remove from tractor.
|Cutter Deck Visibility||Visibility of the cutter deck is captured from the operator’s seat. Easy to see
operation. Operator does not have to look behind.
|Factory Assembled||Arrives ready for the customer, saves time and money. (Excluding gauge wheel
options and fluids.)
|Grease Ports||All grease ports are easily accessible for servicing.|
|10' Transport Width||Folds up close to the tractor. No weight brackets or decks hanging away from the
tractor. Typically, not much wider than the tractor, which means safer transporting.
|Extension Arm Design||One cylinder used to adjust extension arm horizontally 32" is easy to operate.|
|Long Horizontal Reach||Good access for reaching vegetation far away from the tractor.|
|Above Grade Vertical Reach||Good access for reaching up embankments and cutting low over hanging limbs.|
|Below Grade Reach||Good access for reaching down embankments.|
|175 Degree Deck Rotation Angle||Cutter head can be positioned to reach different angles.|
|Cat. 2 & Cat. 3 with Quick Hitch
540 rpm or 1000 rpm
|Fits a wide variety of tractors.|
|35 Gallon Oil Reservoir||Large reservoir maintains optimum fluid temperatures and also serves as
|1" Cutting Capacity||Good for trimming brush.|
|High Blade Tip Speed||15,600 FPM tip speed means cleaner cutting.|
|One Parking Stand||Easy to adjust 3-point hitch level for unhooking tractor.|
|In-line Filter||Cleans hydraulic fluid before it re-enters the reservoir.|
|Shut-off Valve||Permits maintenance with minimum oil loss.|
|Built-in Auxiliary Weight Rack
on Left Side
|Suitcase weights can be added to left side for balance. Able to choose the weight
bracket to match various types of suitcase weights.
|Oil Pressure Gauge||Easily monitor oil pressure for optimum performance of unit.|
|Pressure Relief Valve||Protects against high hydraulic fluid pressure.|
|Gauge Wheels Option||Deck floats on gauge wheels eliminating frequent deck positioning and vigilant watch
for changes in ground contour under the tractor and/or deck.
|SMV Mounting Socket (Standard)
SMV Sign (Accessory)
|SMV mounting socket receives most SMV signs equipped with a mounting blade for
ease of attachment and removal when transporting on a truck or trailer.
SMV sign is offered as an accessory when the tractor’s SMV sign and mounting blade
does not fit the cutter’s standard SMV mounting socket.
|Specifications & Capacities||DB2660|
|Tractor horsepower||75 Minimum hp.|
|Minimum tractor lift capacity||2,500 lbs|
|Minimum tractor weight||7,000 lbs without added weights|
|Weight||1,792 lbs (With front & rear chain guards, side gauge wheel, Ditch Bank mounted
speed increaser, & Case weight hanger. Without fluid in reservoir)
|Hitch type||Cat. ll or Cat. ll/lll Quick Hitch. Clevis style lower hitch.|
|Tractor power take-off speed||DB2660 = 540 rpm; DBM2660 = 1000 rpm|
|Transport width, minimum||10' - 1" (without gauge wheels)|
|Overall width (fully retracted with
optional weight bracket)
|10' - 3 3/4"|
|Minimum cutting height
Maximum is dependent upon 3-point lift height.
|Horizontal cutting extension||32"|
|Maximum horizontal reach from center of tractor||13'-2"|
|Deck rotation||85o up, 95o down|
|Blade tip speed||15,600 FPM|
|Number of blades & size||2, 1/2" x 4"|
|Blade bolt||1 1/2" With keyway, harden flat washer, and locknut|
|Dishpan||3/16" X 21" Round, dish-shaped|
|Cutting capacity||1" Max.|
|Deck thickness||10 GA|
|Side skirt thickness||3/16"|
|Speed Increaser fluid capacity||NOTE:
Refer to metal tag on speed increaser for vendor name (BIMA or Comer).
Tractor mount, refer to Figure 6-4 on page 42.
BIMA = 1 1/2 pints
Comer = 2 pints
Ditch Bank mount, refer to Figure 6-5 on page 42.
BIMA = 2 pints
Comer = 1 pint
|Speed increaser fluid||80-90W EP Gearlube|
|Hydraulic fluid||Mobilfluid 424
For alternate fluids, search on the web for "Mobilfluid 424" or go to www.mobil.com
|Reservoir capacity and filter||35 Gallons / conventional 10 micron filter|
|Method to check oil capacity||Dipstick|
|Hydraulic fluid flow rate||15 gpm (approx.)|
|Overload protection||Hydraulic relief valve|
|Driveline (optional)||ASAE category 4|
|Skid shoes||2 1/2" Wide x 1/4" thick & replaceable|
|Gauge wheel (optional)||4 x 8 Laminated tire with greasable caged roller bearings.|
|Gauge wheel adjustment||Manual|
|SMV Sign (Accessory)||SMV decal on galvanized steel back sign and plated or galvanized blade mount.|