|Surpassed rugged industry standards
|All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
|5 Year gearbox warranty
|Shows our confidence in the gearbox integrity.
|Gearbox Seal Protection
|Gearbox bottom seal protection for longer bearing life.
|Cat. 3 driveline with shear-bolt Option
|Shear-bolt offers maximum driveline protection.
|Cat. 3 driveline with 2-plate slip-clutch Option
|Slip-clutch driveline offers convenience for continual work.
|Dual position clevis type 3-Point floating top link
|Permits deck to follow the terrain for an even cut.
|Lower clevis type 3-Point hitch
|Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design.
|Heavy 10 gauge deck & side skirt construction
|Can withstand more abuse than lighter gauge decks.
|Box tubing deck supports
|Makes for a stronger rigid deck.
|Fully welded deck
|Adds additional strength.
|Extended cutter front
|For increased material flow and added protection.
|Round back design
|Helps discharge grass better than enclosed or partially enclosed cutters.
|9 11/16" Deck height on 60" and 11" deck height on 72" model Allows cutter to handle heavy cutting conditions.
|1 1/2" to 12" Cutting height
|Provides for a wide range of cutting conditions.
|Full length skid shoes
|Provides sidewall reinforcement and full protection to bottom of sidewall.
|1/2" x 3" Heat-treated free swinging blades
|Free swinging protects from obstructions. Heat-treated offers longer life.
|Splined blade bar hub
|Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
|10 Gauge stump jumper
|Standard round stump jumper slides over stumps, rocks and debris.
|High blade tip speed
|Ensures clean cut.
|15" Laminated tailwheel
|Laminated material is long lasting in rough conditions. Can't go flat.
|4" x 16" Solid rubber tailwheel
|Can't go flat.
|1 1/4" Heavy-duty spindle on tailwheel
|Tailwheels take a beating, spindle gives the strength to protect tailwheel assembly.
|Protect against flying debris. Customer can choose to include single chain or rubber guarding on the front and back. Rear Metal Band standard on the back.
|Keeps driveline up out of dirt. Easier hook up of driveline.