Land Pride RCF2784

Double tap to zoom

 

Features

FEATURES BENEFITS
Surpassed rugged industry standards All Land Pride cutters have been designed and tested and meet rigorous voluntary
testing procedures specified by ANSI.
5 Year gearbox warranty A rugged heavy built gearbox capable of handling heavy cutting applications.
Shows Land Pride’s confidence in gearbox integrity.
Gearbox Seal Protection Gearbox bottom seal protection for longer bearing life.
130 Horsepower gearbox A rugged heavy built gearbox capable of handling heavy cutting applications.
Cat. 4 driveline with 4-plate slip-clutch Excellent gearbox protection with the slip-clutch slipping when encountering
obstruction in blade path. Standard slip-clutch offers convenience over shear-bolts.
Cat. II or III hitch with floating top link Permits deck to follow the terrain for an even cut.
Quick Hitch Capability Quick Hitch provides for fast hook-up.
Lower clevis type 3-Point hitch Allows for ease of hook-up to tractor. Also adds additional strength allowing for an
even pull from the tractor’s lower arms, vs. pulling on a single pin design.
84" Cutting width Wide cutting width, Reduces cutting time in the field.
Heavy 10 gauge deck & 1/4" side skirt construction 10 gauge deck can withstand more abuse than lighter gauge decks and 1/4" side
skirts provide excellent reinforcement and also protect sides from debris being
thrown against them from the blades.
Box tubing deck supports Makes for a stronger rigid deck.
Fully welded deck Robotic welded. Adds additional strength and deck integrity.
Extended cutter front For increased material flow and added protection.
Round back design Helps discharge grass better than enclosed or partially enclosed cutters.
Deck Height
10 1/8" (RCF2784)
9 7/8" (RCR2684)
Allows cutter to handle heavy cutting conditions.
1 1/2" to 12" Cutting height Provides for a wide range of cutting conditions.
High cutting capacity Can cut brushy areas with saplings up to 3".
Full length skids with replaceable shoes Full length skids protect side plate structure, replaceable shoes for convenience.
1/2" x 4" Heat-treated free swinging blades Free swinging protects from obstructions. Heat-treated offers longer life.
Splined blade bar Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
Oval stump jumper Standard stump jumper aids in sliding over obstructions such as stumps, rocks and
debris, which also helps protect gearbox output shaft.
High blade tip speed Ensures clean cut. (14,369 fpm)
Available with single or dual tailwheel Dual tailwheels offer greater stability in uneven terrain
15" Laminated tailwheel Laminated material is long lasting in rough conditions. Can't go flat.
1 1/2" Heavy-duty spindle on tailwheel Tailwheels take a beating, spindle gives the strength to protect tailwheel assembly.
Optional Front Guarding Protect against flying debris.
Customer can choose to include single chain, double chain or rubber guarding.
Optional rear guarding Protect against flying debris.
Customer can choose to include single chain or double chain.
Standard rear metal band Protects against flying debris.
Acts as a baffle o help mulch cuttings into smaller pieces.

Specifications

Model RCF2784
Machine weight
3-Point single tailwheel
3-Point dual tailwheel
Pull-type dual tailwheel
1,354 lbs. with front & rear chain guards
1,427 lbs. with front & rear chain guards
1,632 lbs. with front & rear chain guards and
hydraulic adjustment
3-Point hitch Category II & III with floating top linkage, quick hitch adaptable
Pull type tongue weight 687 lbs.
Cutting width 84"
Overall width 89"
Overall length
3-Point single tailwheel
3-Point dual tailwheel
Pull-type dual tailwheel
132 1/2"
130 3/8"
159 1/4"
Deck height (bottom of deck to
bottom of skid shoe)
10 1/8"
Cutting height 1 1/2" to 12"
Cutting capacity 3" Diameter
Recommended tractor power
take-off horsepower
60-130 horsepower
Power take-off speed 540 rpm
Gearbox ratio 1:1.21
Gearbox construction Speed-up beveled gears, cast iron housing, 1 3/8"-6 spline input shaft and 2" output shaft
Gearbox oil capacity & type 6.5 Pints of EP 80-90W gear lube
Deck construction All welded deck
Deck material thickness 10 Gauge
Side skirt material thickness 1/4"
Skid shoes 1/4" thick bolt-on replaceable skid shoes
Stump jumper 3/16" x 24" x 38" Oval pan with 1" thick blade holder bar
Blades (2) 1/2" x 4" x 31" Heat treated alloy steel free-swinging high lift
Blade bolts Keyed with harden flat washers & lock nuts.
Blade tip speed 14,369 FPM
Driveline ASAE Category 4
Driveline protection 4 Plate slip clutch
Tailwheel mount Welded A-arm and caster fork with 360 degree swivel
Tailwheel 4" x 8" x 15" Laminated tire with cast iron hub
Front guard Rubber guard (optional)
Single chain guard (optional)
Double chain guard (optional)
Rear guard Metal band (standard)
Single chain guard (optional
Double chain guard (optional)
  • brand caseih
  • brand ashland
  • brand brent
  • brand cubcadet2
  • brand gehl
  • brand geringhoff
  • brand grasshopper
  • brand greatplains
  • brand kinze
  • brand landoll
  • brand landpride
  • brand macdon
  • brand polaris
  • brand rotomix
  • brand supremeint
  • brand vermeer