|Surpassed rugged industry standards
|All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
|5 Year gearbox warranty
|Shows Land Pride's confidence in gearbox integrity.
|110 HP gearbox
|A rugged heavy built gearbox capable of handling heavy cutting applications.
|Cat. 4 drive-line with 4 plate slip-clutch
|Excellent gearbox protection with the slip-clutch slipping when encountering obstruction in the blade path. Standard slip-clutch offers convenience over shear-bolts.
|Cat. l or ll 3-point hitch
|Allows use on a wider variety of tractors.
|Lower clevis type 3-point hitch
|Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design.
|Heavy 10 gauge deck construction
|Can withstand more abuse than lighter gauge decks.
|1/4" Side panels for overall reinforcement
|Also protects sides from debris being thrown against them from the blades.
|Fully welded deck
|Robotically welded. Adds additional strength and reduces rust.
|Extended front tapered deck
|Contains and discharges material better.
|Round back design
|Allows for more efficient handling and dispersing of material.
|9" Deck Height
|Allows cutter to handle heavy cutting conditions.
|2" to 12" Cutting height
|Provides for a wide range of cutting conditions.
|High cutting capacity
|Can cut brushy areas with saplings up to 3".
|Full length skids with replaceable shoes
|Full length skids protect side plate structure, replaceable shoes for convenience.
|1/2" x 4" Heat-treated free swinging blades
|Free swinging protects from obstructions. Heat-treated offers longer life.
|Splined blade bar
|Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
|3/16" Round stump jumper
|Standard stump jumper aids in sliding over obstructions, which helps protect gearbox output shaft.
|High blade tip speed
|60" =12,384 fpm and 72" = 14,861 fpm
|3" Dia. cutting capacity
|Can aid in clearing brush.
|Rugged laminated tail-wheel
|Can't go flat. Choice of single or dual combination.
|Chain or rubber shield option
|Located on front and rear. Reduces flying debris.
|Keeps drive-line up out of dirt. Easier hook up of drive-line.