|Low volume motor @ 11-17 gpm
Medium volume motor @ 18-23 gpm
High volume motor @ 24-30 gpm
|Customer can chose one of three optional motors (low, medium and high volume) for his SC2560 or SC2572 cutter.
This allows the cutter to fit a wide variety of Skid Steers. Also the deck can be upgraded to a different motor when owner upgrades his Skid Steer
|1/4" Side panels for overall reinforcement
||Protects sides from debris being thrown against them from the blades.
|Front and rear chain shields
||Single chain on the front and double chain on the rear. Reduces flying debris.
|Replaceable skid shoes (optional)
||Protect side plate structure. Shoes are replaceable for convenience.
|Splined blade bar
||Allows for tight positive fit of stump jumper and blade bar to motor output shaft.
|3/16" Round stump jumper
||Standard stump jumper aids in sliding over obstructions, which helps protect gearbox output shaft.
|1/2" x 4" Heat-treated free swinging blades
||Heat-treated blades offer longer life. Free swinging blades protect from obstructions.
|2" Diameter cutting capacity
||Can aid in clearing brush.
|SC2560 High blade tip speed
||Low volume motor = 17,939 fpm at 17 gpm.
Medium volume motor = 19,181 fpm at 23 gpm.
High volume motor = 19,390 fpm at 30 gpm.
|Offset hitch (8 1/2" to the right)
||Allows the operator to cut close to obstacles on the right side.
|Optional front gauge wheel
||Provides easy operation and handling over uneven terrain, laminated tire can't go flat.
|Polycarbonate door (optional)
||Protects operator from thrown objects.
|Floating hitch mounting plate
||Allows smoother travel over rough terrain with the optional gauge wheel easing the fatigue put on the operator.
|Motor pressure gauge
||Allows the operator to ensure that the motor is operating at proper psi.
|Lift limit safety chain
||Provides additional operator protection from flying objects by allowing the Rotary Cutter to only be lifted up to 18".