|High hopper capacities
|Able to cover large areas between hopper refills.
|Low profile hoppers
|Low filling height. Easy to fill.
|Drive unit is without gears or hydraulic motors
|Provides simple maintenance.
|One piece hopper molded of fiberglass or polyethylene
|Plastic construction to eliminate corrosion. Seamless for accurate and consistent emptying.
|Parts in direct contact with product are constructed of non corrosive materials
|Helps eliminate corrosion of parts.
|Highly productive at 44 to 890 lbs. per acre.
|Pendulum type broadcast
|Provides even spreading and controlled coverage up to 50 ft. effective spreading width. Pendulum system insures that the material is always spread the same on left and right side.
|Two position pendulum angle
|Allows to increase or decrease spreading width.
|Heavy-duty tubular frame
|Supports hopper weight with optional extensions when full.
|Good for pulling a trailer loaded with product to fill the spreader or pulling a drag harrow. (Not available with PFS8010 model.)
|540 RPM shielded PTO
|For added safety.
|Standard Plastic pendulum spout
|Protects from corrosive material to enhance longevity. Optional spouts are constructed of stainless steel to enhance longevity.
|Variable adjustable gate
|Provides for precision control of discharge rate.
|Stainless steel gate
|Protects from corrosive material enabling gate to operate smoothly.
|Plated adjustment levers
|Protects from corrosive material to enhance longevity.
|PFS4000 with Cat. I 3-point hitch
PFS5060 with Cat. I & II 3-point hitch
PFS8010 with Cat. II 3-point hitch
|For attachment to a wide range of tractors.
|Optional Agitator Kit
|Helps keep light fluffy material from bridging. (Not available on the PFS4000 model.)
|Optional Hydraulic Gate Kit
|Allows the operator to open and close the discharge gate hydraulically on the go. (Not available on the PFS4000 model.)
|Optional Hopper Extensions Kit
|Increases hopper capacity. (Not available on the PFS4000 model.)