Vermeer FPX9000

Double tap to zoom

 

Features

CONSISTENT CUT SIZE

A primary rotor cuts the initial pieces of crop from the bale before delivering it to the high-speed rotor knives. The high-speed rotor chops the crop further before sending it back through the primary rotor and ejecting it from the machine. These multiple touch points provide consistency of cut size throughout the entire bale.

VERSATILITY

The Final Cut FPX9000 is ready for windrow and bunk feeding, or processing material into a bunker and other storage items for mixing rations later. An optional powered sidewall allows you to process round or square bales.

EASY MAINTENANCE

Bales are consistently fed into the primary rotor, reducing the need to reverse rotation. This slat and chain bale rotation design allows for easy maintenance without the need to remove the entire rotation bed and reduces the need to replace bushings and buildup.

DURABLE INTERMESHING FLAILS

Lessen the chance of unprocessed crop being fed through the machine with durable intermeshing flails on the primary rotor and high-speed rotor. These components produce a better consistency of processed material and reduce twine and net buildup.

DUAL DIRECT DRIVE GEARBOX

Powerful and even distribution of material out the right-hand side of the machine is achieved with the dual direct drive gearbox. The benefit of this design delivers greater durability and requires less maintenance.

Specifications

Dimensions and Weights  
Length 15.8 ft
Height 8.8 ft
Transport Width 8.4 ft
Working Width 12 ft
Weight 6280 lbs
Drawbar Weight 1900 lbs
Axle adjustment 12 in (30.5 cm) each axle
Tires Standard: 14L-16.1FL; Optional: 16.5L-16.1SL 6 SofTrac II flotation tire
Tractor Requirements  
PTO horsepower minimum 110 hp (82 kW) with automatic bale feed; Without automatic bale feed, use recommended PTO horsepower
PTO horsepower recommended 150 hp
PTO horsepower maximum 210 hp
PTO Speed 1000 rpm
Hydraulics type 3 - double acting
Hydraulic Pressure 2000 psi
Hydraulic flow rate 8 gpm 
TUB  
Bale rotation 3 roller chains with bolt-on cross slat
Bale size capacity (2) bales, 6 ft x 5 ft (1.8 m x 1.5 m)
Bale weight capacity 2500 lbs
PROCESSING SYSTEM 
Cut Control Bar Adjustment Hand lever with 5 settings
Cut Control Bar Quantity 7
Flail description Dual 1/4 in (0.6 cm) blade x 5-1/2 in (14 cm)
Flail Drum Diameter 26.8 in
Flail Drum Length 78 in
Flail Drum Speed 1500 rpm
Flail Drum Quantity 60
High-speed rotor flail description 3/16 in x 6-11/32 in (0.5 cm x 16.1 cm) in reversible knives
High-speed rotor diameter 22.2 in
High-speed rotor length 75.2 in
High-speed rotor speed 3000 rpm
High-speed rotor flail quantity 60
DISCHARGE SYSTEM  
Discharge Direction Right hand
Horizontal spread distance Up to 40 ft (12.2 m)
FEATURES  
Safety Chain Optional
Torque Protection - Driveline Shear bolt
Scale kit Optional
Material containment kit Optional
Powered sidewall Optional
Square bale kit Optional
Automatic bale feed system Optional
  • brand caseih
  • brand ashland
  • brand brent
  • brand cubcadet2
  • brand gehl
  • brand geringhoff
  • brand grasshopper
  • brand greatplains
  • brand kinze
  • brand landoll
  • brand landpride
  • brand macdon
  • brand polaris
  • brand rotomix
  • brand supremeint
  • brand vermeer