Vermeer 5520 Baler
Balers 5520 Baler
Overview:
The 5520 is designed for hard-working, independent operators who have a sharp eye for great values.
These smaller 60-in (152.4-cm) diameter balers offer the perfect balance of simplicity, convenience and long-term reliability for the rural lifestyle customer.
Features
ADVANCED NETWRAP SYSTEM
Advanced netwrap system makes net easier to feed, easier to operate. No more hassles with belts and rollers. Just feed net directly to the baler’s main belts.
BALANCED DENSITY SYSTEM
New balanced density system, with improved belt tracking, increases belt life and produces better-looking bales. Also, Alligator rivet belt laces are used for maximum strength.
OPTIONAL HAYSAVER WHEELS
Fill the bale chamber corners and build square-shouldered bales with optional Haysaver wheels.
SMALLER BALERS
With a 50-hp (37-kW) tractor, the Rebel 5520 baler produces 5-ft x 5-ft (1.5-m x 1.5-m) bales that weigh up to 1200 lb (544.3 kg).
Specifications
| Bale Size | |
| Bale Diameter | 36 in -60 in (91.4 cm - 152.4 cm) |
| Bale Width | 61 in |
| Bale Weight | 1400 lbs |
| DIMENSIONS AND WEIGHTS | |
| Length Standard | 150 in |
| Length With Net | 171 in |
| Length With Ramp | 167 in |
| Height | 102 in |
| Width with standard tires | 109 in |
| Tires | 12.5L-15 |
| Weight Fully Optioned | 5320 lbs |
| BALE FORMING CHAMBER | |
| Drive Roller Size | 5.5 in (14 cm) |
| Drum Roller Size | 12 in |
| Idler Roller Size | 3.5 in (8.9 cm), 4.8 in (12.1 cm) |
| Start Roller Size | 4.5 in |
| Belt Type | Standard mini rough top |
| Width of Belt | 6.8 in |
| Number of Belts | 7 |
| Type of Lace | Alligator Rivet |
| Length of Belt - Long | 441 in |
| Length of Belt - Short | 429 in |
| DRIVE SYSTEM | |
| Driveline | 540 rpm, standard lube, radial pin clutch |
| Bearing and Sprocket Configuration | Round drive shafts and bearings - Hex shaft on drum |
| TRACTOR REQUIREMENTS | |
| Horsepower Required | 50 hp |
| Horsepower Recommended | 60 hp |
| PICKUP | |
| Pickup type | Standard |
| Width Tooth to Tooth | 57 in |
| Width On Outside Flair | 58 " (147.3 cm) |
| Width of Haysaver wheels *listed for select models only | 87 in |
| Tooth Bars | 4 |
| Number of Teeth | (40) double rubber-mounted |
| Flotation | Spring assist |
| Pickup Lift | Manual |
| CONTROL SYSTEM | |
| Control system type | Optional Bale Expert™ |
| Display | Monochrome LCD screen |
| Moisture | Optional - up to 27% |
| DENSITY | |
| Bale density adjustments | Manual adjustment on relief valve |
| Density readings | Optional physical gauge |
| Cylinder size | 2.5 in (6.4 cm) |
| BALE TIE SYSTEM | |
| Twine system | Optional |
| Netwrap system | Optional |
| Net tension control | via mechanical adjustment |
| FEATURES | |
| Bale ramp | Optional spring-loaded |
| Fire extinguisher, safety chain | Optional |
