Vermeer 604 Pro G3 Baler

Double tap to zoom



Heavy-duty components

The G3 Pro baler is designed with a solid frame, heavy-duty components like large bearings, chains and rollers, and poly pickup bands to fit the needs of North American silage producers handling wet, heavy bales.

Xtracut17 chopper system

Xtracut17 chopper system cuts the crop for better bale density, fermentation, silage quality and digestibility. The pre-cut crop also provides a consistent material for additions to rations fed using a mixer wagon.

Netwrap system

The new netwrap system is designed for operator convenience with netwrap now in the back and the ability to adjust netwrap tension and monitor netwrap available on the roll.

Atlas Pro control system

Atlas Pro™ control system is equipped with a 7-in (17.8-cm) color touchscreen display that gives operators advanced, real-time field statistics for up to 50 fields and allows you to view and adjust various baler settings including netwrap tension, bale density settings and monitor moisture levels all while in-cab.


Bale diameter 36 in-72 in (91.4 cm-182.8 cm)
Bale width 48 in (121.9 cm)
Bale weight* 2400 lb (1088.6 kg)
Length standard 213 in (541 cm)
Length with net NA
Length with ramp NA
Height 120 in (304.8 cm)
Width standard 112 in (284.5 cm)
Weight fully optioned 10,000 lb (4535.9 kg)
Drawbar weight 920 lb (417.3 kg)
Type of chamber Variable
Drive roller size (1) 7.1 in (18 cm) diameter, rubber covered and (1) 6.6 in (16.8 cm) in diameter, steel, all with 50 mm (1.9 in) bearings
Drum roller size 9.5 in ribbed
Idler roller size 9.5 in, 6.6 in, 4.5 in, 2 rubber covered intermeshing
Start roller size 8 in (20. 3 cm)
Number of plys 3-ply mini rough top
Width of belt 11.2 in (28.5 cm)
Number of belts 4
Length of belt (long) 472.4 in (1198.9 cm)
Length of belt (short) NA
Type of lace Endless belts
Driveline 80º CV, optional 540 rpm
Drive roller chains Single 60, 80, 100 and double 80
Torque protection main input shaft Cut-out clutch
Torque protection pickup Radial pin clutch
Bearing and sprocket configuration Round and hex drive shafts, greasable roller bearings
PTO horsepower required 90 hp (67.1 kW)
PTO horsepower recommended 120 hp (89.5 kW)
Width tooth to tooth 73 in (185.4 cm)
Width on outside flair 78 in (198.1 cm)
Tooth bars 5
Number of teeth 75 double rubber mounted with 2.5 in (6.4 cm) spacing
Stripper band diameter 13.5 in (34.3 cm)
Drive Single 60
Flotation Gauge wheels 7.10-16 HD semi-pneumatic — spring assist
Pickup lift Hydraulic standard
  • brand caseih
  • brand ashland
  • brand brent
  • brand cubcadet2
  • brand gehl
  • brand geringhoff
  • brand grasshopper
  • brand greatplains
  • brand kinze
  • brand landoll
  • brand landpride
  • brand macdon
  • brand polaris
  • brand rotomix
  • brand supremeint
  • brand vermeer