Vermeer RR140 Rotary Rake

Double tap to zoom

 

Features

VERSATILE WINDROW SIZES

The RR140 rotary rake is capable of making windrows at a minimum of 16-in (40.6-cm) wide and up to 3-ft (.9-m) wide, depending on the volume of the crop. With 11 arms, each equipped with four double tines, the RR140 is gentle on the crop and allows for air flow through the windrows for quicker dry down.

EFFICIENT COMPONENTS FOR QUALITY OUTPUT

Hydraulic lift and rake adjustments help ensure operators can get up and over windrows and minimize ash content getting raked into the windrow. Two lift cylinders work off of the same circuit to allow the operator to adjust raking height from the seat of the tractor. There is also a manual crank that allows you to set the rake pitch.

COMPACT TRANSPORT

With a transport width of 6.7 ft (2 m), the RR140’s perimeter guarding on both sides folds directly up and the 11 arms hook into storage locations on the tongue. This provides ability to transport down narrow roads and through gate openings.

Specifications

DIMENSIONS AND WEIGHTS  
Raking width minimum 12.7 ft
Raking width maximum 15.1 ft
Windrow width minimum 28 in
Windrow width maximum 55 in
Transport Width 6.6 ft
Transport Length 16.4 ft
Transport Height 8.5 ft
Total Weight 1676 lbs
Tongue Weight 221 lbs
Transport tire size 18x8.5-8
Drive PTO, 540 rpm
RAKING COMPONENTS  
Rotor Diameter 135 in
Number of tine arms 11
Number of double tines per arm 4
TRACTOR REQUIREMENTS  
PTO horsepower minimum 30 hp
Hydraulic Type 1 double-acting
Hydraulic Pressure 1800 psi
Hydraulic flow rate 8 gpm
  • brand caseih
  • brand ashland
  • brand brent
  • brand cubcadet2
  • brand gehl
  • brand geringhoff
  • brand grasshopper
  • brand greatplains
  • brand kinze
  • brand landoll
  • brand landpride
  • brand macdon
  • brand polaris
  • brand rotomix
  • brand supremeint
  • brand vermeer