Landoll 9630-30
9600 Series Field Cultivator 9630-30
Overview:
The new era in Field Cultivators begins with the 9600 Series from Landoll, the ultimate seedbed preparation tool built to handle today's demanding conditions.
Features
- Laser Cut, Robotically Welded Frame
- 135” Frame Depth
- 30” Minimum Between Shank Ranks
- Self-Leveling Hitch
- Cast Single Lip Hitch Cat. III or Cat. IV (Model Dependent)
- Outrigger Gauge Wheels on 28’ - 50’ Models
- Shanks with 190 lbs. Point Load (Spring Clamp or Two Piece S-Tine)
- 26 ½” Under Frame Clearance
- 6” Shank Spacing
- 8” Sweeps, 47 degree
- Shanks Centered on Tires
- Walking Tandems in All Locations
- 11L x 15-12 Ply, 12.5L x 15-12 Ply, 12.5L x 15 Load Range F (Model Dependent)
- Single Point Depth Control
- Blue Powder Coat Paint
- Safety Warning Lights
Specifications
| Model | 9630-30 |
| Approximate Weight - Spring Shanks | 11,500 lbs. (5,216 kg) |
| Approximate Weight - S-Tine Shanks | 10,585 lbs. (4,801 kg) |
| Working Width | 30 ft. 6 in. (9.3 m) |
| Transport Width | 17 ft. 4 in. (5.3 m) |
| Transport Height | 13 ft. 0 in. (4.0 m) |
| Number of Shanks | 61 |
| Number of Shanks Per Section | 17-27-17 |
| Shank Type | Spring Clamp Shanks or 2-Piece S-Tine Shanks |
| Shank Size | 0.625 x 1.75 in. (15.9 x 44.5 mm) |
| Point Load | 190 lbs. (86 kg) |
| Spring Shank Tower | Laser Cut/Matchcut Components |
| Spring Size | Extension Type 0.46875 in. (11.9 mm) Wire Diameter |
| Shank Spacing | 6 in. (152 mm) |
| Special Shank Position | Rear Shanks Centered on Tires |
| Sweeps | 8 in. (203 mm) with 47 Degree Mount |
| Under Frame Clearance | 26.5 in. (673 mm) |
| Frame | 4 in.x 3 in. x 0.25 in. (102 x 76.2 x 6.4 mm) |
| Frame Construction | Laser Cut/Matchcut Components, Robotically Welded |
| Frame Type | Truss Type With Wrapped Shank Tube Joints |
| Transport Lift Axles | 4.5 in. (114 m) Axle With Tower Lift System |
| Walking Tandems | Standard With Hardened Connex Bushings |
| Tire Size - Main Frame | (4) 320/70R x 15 |
| Wheel Hubs - Main Frame | 8-Bolt |
| Spindles - Main Frame | 2.25 in. (57.2 mm) Slip-In Spindles |
| Tire Size - Wing Frame | (4) 320/70R x 15 |
| Wheel Hubs - Wing Frame | 6-Bolt |
| Spindles - Wing Frame | 2.25 in. (57.2 mm) Slip-In Spindles |
| Hitch Type | Self-Leveling with Manual Adjustment |
| Hitch Category | Cat. III Single Lip with 2.0 in. (50.8 mm) Hole |
| Machine Deptd Control | Single Point, Front Mounted |
| Hydraulics | 10 in. (254 mm) Stroke Cylinders |
| Outrigger Gauge Wheels | Standard |
| Safety Warning Lights and SMV Emblem | Standard |
| Safety Chain Kit | Standard |
| Powder Coat Paint, Blue Sapphire | Standard |
| Rear Hitch With Hydraulic Hoses | Optional |
| Cat. V Single Lip Hitch Clevis (3 in. Hole) | N/A |
| 9 in. Sweeps | Optional |
| 8 in. Ultra Wing Sweeps | Optional |
| 9 in. Ultra Wing Sweeps | Optional |
| Attachment Options: | |
| Flexible 5-Row Spike Harrow | Optional |
| 4-Row Coil Tine Harrow | Optional |
| 3-Row Spike and Reel Attachment | Optional |
| 3-Row Tine and Reel Attachment | Optional |
| Horsepower Requirements | 7 to 9 HP (5 to 7 kW) Per Foot |
